This hybrid turbo for engine variants 1.9 JTD and 1.9 MJTD benefits from d'an internal mechanism designed to adjust the compression capacity and flow rate' d'air'. Its configuration is described as plug & play, without any changes to the assembly, fitted with an MFS compressor wheel and high-speed balancing.
The documented allocations relate to several models Alfa Romeo and Fiat. The benchmark for turbochargers d'However, the origin must be verified before any order is placed'.
Available products — Stage 1, Stage 2 and Stage 3
Stage 1
Compressor wheel: High-capacity MFS
Stop: 360° bearing
Balancing: high speed at 150,000 rpm on a Cimat VSR test bench
This preparation acts primarily on the compressor wheel in order to d'adjust the flow rate' d'air', whilst keeping the other changes strictly as documented.
Stage 2
Compressor wheel: High-capacity MFS oversized
Carter d'Admission:' reprofiled for to receive the new wheel oversized
Stop: 360° bearing
Balancing: high speed at 150,000 rpm on a Cimat VSR test bench
Reprofiling the casing allows d'to accommodate the compressor wheel' oversized. This change may affect the compressor’s flow rate and behaviour, depending on the engine management system and associated components.
Stage 3
Compressor wheel: High-capacity MFS oversized
Carter d'Admission:' reprofiled for to receive the new wheel oversized
Stop: 360° bearing
Turbine wheel: high-speed oversized
Turbine casing: reprofiled for to receive the new wheel oversized
Balancing: high speed at 150,000 rpm on a Cimat VSR test bench
This modification combines changes to both the compressor and turbine sides. Oversizing can affect the flow rate d'air, conditions d'optimal performance and response time; it must therefore be combined with proper engine preparation'.
What is a hybrid turbo ?
A hybrid turbo is based on a specially adapted turbocharger design for to receive internal changes. Depending on the course, these may cover the compressor wheel, the casings, the turbine wheel, the thrust bearing and balancing.
The aim is d'adjust the compression and bitrate' d'air'. A hybrid turbine is not defined solely by the appearance of its impeller: the geometry, its integration into the casings and the overall balance are crucial.
MFS compressor wheel: standard or Performance ? ?
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This manufacturing process does not, on its own, guarantee an increase in throughput d'air'. A standard MFS wheel can retain a geometry equivalent to that d'origin'.
A standard MFS wheel can be just as shiny as an MFS wheel Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more d'air'. For this product, the MFS wheel is described as being lighter, larger and taller than the one d'as originally planned, with an additional 15 per cent reduction announced'. Its operation still depends on the engine being properly prepared.
Why does the geometry of the blades affect the flow rate? d'air?' ?
The compressor wheel draws in and then compresses the intake air. Its diameter, profile, height, width and the arrangement of its blades all influence its aerodynamic behaviour. The right geometry can move more d'air under certain conditions, but the result also depends on the casings, the turbine, the boost pressure and the mapping'. A larger wheel therefore does not automatically guarantee a better result and may affect the response time.
Reliability and balancing of the hybrid turbocharger
The documented 360° stop distributes axial forces across a suitable surface. The rotor is balanced at high speed – up to 150,000 rpm – on a Cimat VSR test bench, in order to minimise vibrations and mechanical stresses. However, this balancing does not protect against incorrect installation, contamination or inadequate lubrication.
Engine remapping and tuning
The engine management system needs to be adjusted for make the most of the hybrid turbo’s features. The mapping, boost pressure and wastegate setting must be checked. Depending on the level of preparation, the fuel injection, exhaust, cooling, intake and transmission systems may also need to be checked or adjusted. A turbocharger on its own does not guarantee any increase in power.
Turbo part numbers
OEM part numbers
46756155
55191595
Manufacturer’s part numbers
708847-2
708847-1
Compatible vehicles and assignments
Alfa Romeo
147 — 1.9 JTD — 100 hp
From 2000 — end date unspecified
Engine code : not specified
Fiat
Brava — 1.9 JTD — 100 hp
From 1998 — end date unspecified
Engine code : not specified
Well done — 1.9 JTD — 100 hp
From 1998 — end date unspecified
Engine code : not specified
Doblo — 1.9 JTD — 100 hp
From 2000 — end date unspecified
Engine code : not specified
Doblo — 1.9 JTD — 105 hp
From 2004 — end date not specified
Engine code : not specified
Doblo 2–1.9 MJTD — 100 and 105 hp
From 2006 — end date not specified
Engine code : not specified
Doblo Cargo — 1.9 JTD — 100 hp
From 2000 — end date unspecified
Engine code : not specified
Doblo Cargo — 1.9 JTD — 100 and 105 hp
From 2004 — end date not specified
Engine code : not specified
Doblo Cargo 2 — 1.9 MJTD — 100 and 105 hp
From 2006 — end date not specified
Engine code : not specified
Marea — 1.9 JTD — 105 hp
From 1997 — end date unspecified
Engine code : not specified
Multipla — 1.9 JTD — 108 hp
From 2000 — end date unspecified
Engine code : not specified
Stilo — 1.9 JTD — 108 hp
From 2000 — end date unspecified
Engine code : not specified
Additional technical specifications
Product type: hybrid turbo
Documented engine specifications: 1.9 JTD and 1.9 MJTD
Allocation powers: 100, 105 and 108 hp
Power ratings stated in the title: 105 and 110 hp
Configuration: plug & play, installation announced as unchanged
Assembly instructions
⚠️ WARNING — IMPORTANT BEFORE ASSEMBLY
Before installation, identify and rectify the cause of the previous fault. Check the lubrication circuit, the supply and the return d'oil, the cleanliness of the pipes, the intake and the absence of foreign objects'. Carry out the priming in accordance with the relevant guidelines and follow the manufacturer’s instructions. If a lubrication fault is not rectified, it may lead to the turbocharger failing again.
How do you choose the right turbo ?
Check the part number engraved or marked on the turbocharger d'origin', then compare the OEM and manufacturer part numbers. Also check the make, model, generation, body style, engine type and power output in hp, theYear the mounting code and the engine code, where available. Having the same engine is not always enough to confirm compatibility.
⚠️ Check your turbo’s part numbers
Before placing your order, Compare the part number on your turbocharger d'origin' using the references given in this fact sheet. Having the same motor does not always guarantee compatibility.
If you’re unsure, please contact us with the reference number clearly visible on your turbo d'origin'.