This hybrid turbo, designed for 2.4 JTD engines, features d a tuning programme focused on optimising the d air flow. Depending on the package selected, it is fitted with a high-flow MFS compressor wheel, a 360° bearing stop and, for certain versions, a reprofiled d intake housing.
Documented applications include the Alfa Romeo 156 and 166, as well as the Lancia Kappa in 2.4 JTD versions from 1997 onwards.
Available formulations — Stage 1, Stage 2 and Stage 2+
Stage 1
Compressor wheel: MFS high-flow
Thrust bearing system: 360° thrust bearing
Balancing: High-speed at 150,000 rpm on a Cimat VSR bench
This modification primarily affects the compressor impeller in order d to adjust the compression capacity and the d air flow. The final result depends on the engine’s configuration and tuning.
Stage 2
Compressor wheel: MFS high-flow oversized
d' intake housing: Reprofiled for accommodate the new impeller oversized
Thrust bearing system: 360° thrust bearing
Balancing: High-speed balancing at 150,000 rpm on a Cimat VSR test bench
The oversized impeller is accompanied by a reprofiling of the d intake housing d. This combination aims to adapt the airflow to the new geometry, without prejudging the engine’s final power output.
Stage 2+
Compressor wheel: MFS high-flow oversized
Casing d'Intake: Reprofiled for to accommodate the new impeller oversized
Bearing system: 360° thrust bearing
Balancing: High-speed balancing at 150,000 rpm on a Cimat VSR test bench
The documented specifications for for this variant include a oversized impeller and a d intake housing that has been re-profiled. No other mechanical differences are specified in the available data.
What is a hybrid turbo?
A hybrid turbo is based on a turbocharger design adapted for to accommodate internal modifications. Depending on the modification, these may involve the compressor wheel, its dimensions, the geometry of the blades, the housings, the turbine wheel, the thrust bearing or the balancing.
The aim is d to adapt the compression capacity and air flow rate d to the requirements of the tuning. A hybrid turbo is therefore not defined solely by the appearance of its compressor wheel, but by the coherence of the mechanical assembly as a whole.
MFS compressor wheel: standard or Performance?
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This manufacturing process alone does not guarantee an increase in air flow rate d. A standard MFS wheel may retain a geometry equivalent to that d of the original.
An MFS impeller Performance can be given a geometry tailored to the tuning objective. Depending on its design, this may involve the profile, height or width of the blades, their arrangement or the impeller’s diameter.
A standard MFS impeller can be just as effective as a custom- Performance d MFS impeller. It is not its appearance that determines its performance, but its geometry and its ability to move more d'air. A higher airflow rate can contribute to power output with the appropriate engine tuning, though it does not in itself guarantee a performance gain.
Why does the geometry of the blades influence the air flow rate d?
The compressor impeller draws in and then compresses the air sent to the engine. Its diameter, profile, height, width and the arrangement of its blades influence its aerodynamic behaviour. A suitable geometry can move more d air under certain operating conditions.
The result also depends on the compressor housing, the impeller and the turbine housing, the boost pressure and the engine management system. A larger impeller does not automatically guarantee better performance and may alter the response time or the range d of optimal operation.
Reliability and balancing of the hybrid turbocharger
The 360° bearing stop present on all three stages helps to distribute the axial forces exerted on the rotating assembly. It does not replace d'proper lubrication or d'correct installation.
Every documented modification undergoes high-speed balancing at 150,000 revs/min on a Cimat VSR test bench. This process aims to minimise vibrations and mechanical stresses on the rotor, but does not protect the turbocharger against insufficient lubrication, foreign objects or incorrect installation.
Engine remapping and tuning
An adjustment to the engine management system may be necessary for to make the most of the hybrid turbo’s characteristics. The mapping, boost pressure, fuel delivery, air cooling d'intake, exhaust and transmission must be checked according to the level of tuning.
The wastegate must be adjusted when remapping the ECU. Fitting d a hybrid turbo does not automatically guarantee a power gain without appropriate mechanical and electronic configuration.
Turbo part numbers
OEM part numbers
46442431
46522417
46763886
71723543
Manufacturer part numbers
454150-0004
454150-0006
454150-4
454150-5006S
454150-6
Compatible vehicles and assignments
Alfa Romeo
156 2.4 JTD — 136 hp
Engine: 2.4 JTD | From 1997 — end unspecified
Engine code : unspecified
156 2.4 JTD — 150 hp
Engine: 2.4 JTD | From 1997 — end unspecified
Engine code : unspecified
166 2.4 JTD — 136 hp
Engine: 2.4 JTD | From 1997 — end unspecified
Engine code : unspecified
166 2-.4- JTD — 150 hp
Engine: 2-.4- JTD | From 1997 — end unspecified
Engine code : unspecified
Lancia
Kappa 2.4 JTD — 136 hp
Engine: 2.4 JTD | From 1997 — end unspecified
Engine code : unspecified
Kappa 2.4 JTD —150 hp
Engine options: 2.4 JTD | From 1997 — end dateunspecified
Engine code : unspecified
Additional technical specifications
Product type: Hybrid Turbo
Engine capacity: 2.4 JTD
displacement: 2-.-4 litres
Power Main: 136 hp
Documented period: From 1997 — end unspecified
Installation: Plug & play, no modifications to the mounting required
Installation tips
⚠️ WARNING — IMPORTANT BEFORE INSTALLATION
Identify and rectify the cause of the previous fault. Check the lubrication circuit, as well as the oil supply and return d.
Check that the pipes and the inlet are clean and free from foreign objects. Carry out the priming procedure in accordance with the applicable recommendations and follow the manufacturer’s instructions.
A lubrication fault that is not rectified may lead to further turbocharger failure.
How do you identify the correct turbo?
Check the part number marked on the turbo d the original part number, OEM and manufacturer part numbers, as well as the make, model, engine type, power output, installation period and engine code. An identical engine may be fitted with several different turbo set-ups.
⚠️ Check your turbo’s part numbers
Before ordering, compare the part number marked on your original turbo d with the part numbers listed in this specification sheet. An identical engine specification does not always guarantee compatibility.
If in doubt, contact our team with the part number found on your original turbo d.