This hybrid turbo for engine 1.9 TD 75 hp benefits from d’a device designed to adjust the flow rate d’air and compression capacity. Depending on the course chosen, he receives a high-flow MFS compressor wheel, a 360° bearing stop and, for the relevant preparations, a casing d’re-profiled intake’.
It is designed to be fitted without any modifications for the applications Audi, , Seat and Volkswagen as set out below. The configuration of the engine and its associated components must be adapted to the chosen level of preparation.
Available products — Stage 1, Stage 2 and Stage 2+
Stage 1
Compressor wheel: High-capacity MFS
Stop: 360° bearing stop
Balancing: high speed at 150,000 rpm on a Cimat VSR test bench
This preparation acts on the compressor wheel in order to d’adjust the flow rate’ d’air, whilst retaining the intended configuration for one Installation without modification.
Stage 2
Compressor wheel: High-capacity MFS oversized
Carter d’Admission:’ reprofiled for to receive the new wheel oversized
Stop: 360° bearing stop
Balancing: high speed at 150,000 rpm on a Cimat VSR test bench
Reprofiling the casing allows d’fit the wheel’ oversized. This configuration may affect the vehicle’s manoeuvrability d’airflow and turbocharger behaviour depending on the associated engine tuning.
Stage 2+
Compressor wheel: High-capacity MFS oversized
Carter d’Admission:’ reprofiled for to receive the new wheel oversized
Stop: 360° bearing stop
Balancing: high speed at 150,000 rpm on a Cimat VSR test bench
The documented evidence for This version includes the MFS wheel oversized, the re-profiled housing, the 360° stop and high-speed balancing. The choice of intake system must take into account the overall engine configuration.
What is a hybrid turbo ?
A hybrid turbo is based on a specially adapted turbocharger design for to receive modified internal components. Depending on the specification, modifications may relate to the compressor wheel, its geometry, its dimensions, the casings, the thrust bearing or the balancing.
The aim is d’adjust the compression and flow rate’ dair. However, a hybrid turbo is not defined solely by the appearance of its impeller: its operation depends on the coherent combination of components and engine tuning.
MFS compressor wheel: standard or Performance ? ?
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This manufacturing process does not, on its own, guarantee an increase in throughput dair. A standard MFS wheel can retain a geometry equivalent to that d’origin’.
A standard MFS wheel can be just as shiny as an MFS wheel Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more dair. Depending on the set-up, one wheel Performance can use a profile or dimensions suited to the intended purpose.
Why does the geometry of the blades affect the flow rate? d’air ?
The compressor wheel draws in and then compresses the air fed to the engine. Its diameter, profile, height, width and the arrangement of its blades all influence its aerodynamic behaviour. The right geometry can move more dair under certain conditions, but the result also depends on the casings, the turbine, the boost pressure and the mapping. A larger wheel therefore does not automatically guarantee a better result and may affect the response time.
Reliability and balancing of the hybrid turbocharger
The documented 360° stop distributes axial forces over a wide area. The rotor is balanced at high speed – up to 150,000 rpm on a Cimat VSR test bench – in order to minimise vibrations and mechanical stresses. This balancing does not protect against incorrect assembly, contamination or inadequate lubrication.
Engine remapping and tuning
Appropriate engine management is required for make the most of the hybrid turbo’s features. Mapping, boost pressure, fuel injection, exhaust, cooling and the transmission must be adjusted according to the vehicle and the level of tuning. The wastegate must be adjusted when remapping the ECU. No increase in power is automatic without proper configuration.
Turbo part numbers
OEM part numbers
028145701s
028145701R
Manufacturer’s part numbers
454065-2
454065-0002
53039700003
53039800003
53039880003
53039900003
Compatible vehicles and assignments
Audi
80 — 1.9 TD 75 hp
1.9 TD — from 1991, end date unspecified
Engine code : not specified
A4 — 1.9 TD 75 hp
1.9 TD — from 1993, end date unspecified
Engine code : not specified
Seat
Córdoba — 1.9 TD 75 hp
1.9 TD — from 1993, end date unspecified
Engine code : not specified
Córdoba 2–1.9 TD 75 hp
1.9 TD — from 1996, end date unspecified
Engine code : not specified
Ibiza 2–1.9 TD 75 hp
1.9 TD — from 1993, end date unspecified
Engine code : not specified
Ibiza 2–1.9 TD 75 hp
1.9 TD — from 1996, end date unspecified
Engine code : not specified
Toledo Series 1 — 1.9 TD 75 hp
1.9 TD — from 1991, end date unspecified
Engine code : not specified
Volkswagen
Golf III — 1.9 TD 75 hp
1.9 TD — from 1991, end date unspecified
Engine code : not specified
Jetta 3–1.9 TD 75 hp
1.9 TD — from 1993, end date unspecified
Engine code : not specified
Passat B3 — 1.9 TD 75 hp
1.9 TD — from 1988, end date unspecified
Engine code : not specified
Vento — 1.9 TD 75 hp
1.9 TD — from 1991, end date unspecified
Engine code : not specified
Additional technical specifications
Product type: hybrid turbo
Engine: 1.9 TD
Power : 75 hp
Period covered: from 1988 onwards, depending on the vehicle
Installation: without any changes
Assembly instructions
⚠️ WARNING — IMPORTANT BEFORE ASSEMBLY
Identify and rectify the cause of the previous fault. Check the lubrication circuit, as well as the supply and return lines doil. Check that the ducts and the intake are clean and free from foreign objects. Carry out the priming in accordance with the relevant guidelines and follow the manufacturer’s instructions. If a lubrication fault is not rectified, it may lead to the turbocharger failing again.
How do you choose the right turbo ?
Check the turbo part number d’origin, OEM and manufacturer part numbers, as well as the make, model, generation, engine type, power output, theYear installation and engine code. Having the same motor does not always guarantee compatibility.
⚠️ Check your turbo’s part numbers
Before placing your order, Compare the part number on your turbocharger d’origin’ using the references given in this fact sheet. Having the same motor does not always guarantee compatibility. If you have any queries, please contact our team before placing your order.