This hybrid turbo for engine 1.The 8T undergoes mechanical modification to adjust its compression capacity and flow rate dair. Depending on the configuration chosen, it combines a high-flow MFS compressor wheel, a 360° bearing retainer and re-profiled casings.
Designed for an installation plug & play Without any external modifications, it is particularly suited to applications such as Audi A4 and A6, Seat Alhambra, Volkswagen Passat and Sharan models from 1995 onwards.
Available products — Stage 1, Stage 2 and Stage 3
Stage 1
Compressor wheel: High-capacity MFS
Bearing stop: 360°
Balancing: High speed at 150,000 rpm on a Cimat VSR test bench
This preparation acts primarily on the compressor wheel in order to d’adjust the compression and flow rate’ d’air, whilst retaining a design intended for installation without any external modifications.
Stage 2
Compressor wheel: High-capacity MFS oversized
Carter d’Admission:’ Re-profiled for to receive the new wheel oversized
Bearing stop: 360°
Balancing: High speed at 150,000 rpm on a Cimat VSR test bench
The wheel oversized requires the casing to be re-profiled d’admission’. This organisation aims to improve mobility d’compressor air, with behaviour that also depends on the engine mapping and configuration’.
Stage 3
Compressor wheel: High-capacity MFS oversized
Carter d’Admission:’ Re-profiled for to receive the new wheel oversized
Bearing stop: 360°
Turbine wheel: High flow rate oversized
Turbine casing: Re-profiled for to receive the new wheel oversized
Balancing: High speed at 150,000 rpm on a Cimat VSR test bench
This course combines modifications to the compressor side with a turbine wheel oversized and a re-profiled turbine casing. The assembly alters the flow conditions and may affect the response time as well as the optimum operating range.
What is a hybrid turbo ?
A hybrid turbo is based on a specially adapted turbocharger design for to receive internal changes. Depending on the course, these may cover the compressor wheel, the casings, the turbine wheel, the thrust bearing system and balancing.
The aim is d’adjust the compression capacity and flow rate’ dair. However, a hybrid turbo is not defined solely by the appearance of its impeller: the geometry of the components and how well they fit within the housings are crucial.
MFS compressor wheel: standard or Performance ? ?
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This manufacturing process does not, on its own, guarantee an increase in throughput dair. A standard MFS wheel can retain a geometry equivalent to that d’origin’.
An MFS wheel Performance can be designed with a geometry suited to the preparation objective. In the description of this product, the wheel is described as being lighter, larger and taller than the one d’original, with a compression capacity claimed to be 15 per cent higher.
A standard MFS wheel can be just as shiny as an MFS wheel Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more dair. A higher flow rate can contribute to power development when combined with the correct engine tuning, although this alone does not guarantee a specific result.
Why does the geometry of the blades affect the flow rate? d’air ?
The compressor wheel draws in and then compresses the air fed to the engine. Its diameter, profile, height, width and the arrangement of its blades influence its aerodynamic behaviour and the amount d’air displaced under certain conditions’.
The result also depends on the compressor housing, the impeller and the turbine housing, the boost pressure and the engine tuning. A larger wheel therefore does not automatically guarantee a better result and may affect the response time.
Reliability and balancing of the hybrid turbocharger
The 360° stop, documented for each stage, helps to distribute the axial forces acting on the rotating assembly. It does not exempt d’proper lubrication nor d’a compliant installation’.
The rotor is balanced at high speed, up to 150,000 rpm, on a Cimat VSR test bench. This balancing is designed to minimise vibrations and mechanical stresses, but does not protect against insufficient lubrication, contamination or incorrect installation.
Engine remapping and tuning
The engine mapping and boost pressure control need to be adjusted for make the most of the turbo’s features. The wastegate must be adjusted during remapping. Depending on the level of preparation, the fuel injection, exhaust, cooling, intake, clutch or transmission must also be checked and, if necessary, adjusted.
Turbo part numbers
OEM part numbers
058145703C
058145703D
058145703DV
058145703DX
058145703E
058145703H
058145703L
058145703
058145703LX
06A145703B
06A145703HX
06A145703LX
Manufacturer’s part numbers
53039700005
53039700013
53039800005
53039800013
53039880005
53039880013
53039900005
53039900013
K03-005
Compatible vehicles and assignments
Audi
A4 Series 1 — 150 and 163 hp
1.8 i — from 1995, end date unspecified
Engine code : not specified
A4 Series 1 Phase 2 — 150 and 163 hp
1.8 i — from 1995, end date unspecified
Engine code : not specified
A4 Series 2 — 150 and 163 hp
1.8 i — from 1995, end date unspecified
Engine code : not specified
A4 Series 2 Phase 2 — 150 and 163 hp
1.8 i — from 1995, end date unspecified
Engine code : not specified
A6 Series 2 — 150 hp
1.8 i — from 1995, end date unspecified
Engine code : not specified
Seat
Alhambra — 150 hp
1.8 i — from 1995, end date unspecified
Engine code : not specified
Volkswagen
Passat B4 — 150 hp
1.8 i — from 1995, end date unspecified
Engine code : not specified
Sharan — 150 hp
1.8 i — from 1995, end date unspecified
Engine code : not specified
Additional technical specifications
Product type: Hybrid Turbo
Engine: 1.8T
displacement : 1.8 L
Power as indicated: 150 to 180 hp
Period covered: From 1995 onwards
Installation: Plug-and-play, no external modifications required
Assembly instructions
⚠️ WARNING — IMPORTANT BEFORE ASSEMBLY
Before installation, identify and rectify the cause of the previous fault. Check the lubrication circuit, the supply and the return d’the oil and the cleanliness of the pipes’.
Check the intake and ensure there are no foreign objects. Carry out the priming in accordance with the relevant guidelines and follow the vehicle manufacturer’s instructions.
If a lubrication fault is not rectified, it may lead to the turbocharger failing again.
How do you choose the right turbo ?
Check the part number marked on the turbocharger d’origin, as well as the OEM and manufacturer’s part numbers. Also check the make, model, generation, engine type and power output in hp, the assembly period and, where available, the engine code. Having the same motor does not always guarantee compatibility.
⚠️ Check your turbo’s part numbers
Before placing your order, Compare the part number on your turbocharger d’origin’ using the references given in this fact sheet. Having the same motor does not always guarantee compatibility.
If you are in any doubt, please contact us, quoting the reference number clearly visible on your turbocharger.