This for hybrid turbocharger, designed for a 1.8T engine, has undergone internal modifications to adapt its compression capacity and air flow rate d. Depending on the upgrade package selected, it includes a high-flow MFS compressor wheel, reprofiled housings, a oversized turbine wheel and a 360° bearing retainer.
Its architecture plug & play allows for external Installation without modification. Documented applications include certain Audi A4 and A6 models, Seat the Alhambra, Volkswagen the Passat and Sharan from 1995 onwards.
Available conversions — Stage 1, Stage 2 and Stage 3
Stage 1
Compressor wheel: MFS high-flow
Bearing: 360° thrust
Balancing: high-speed at 150,000 rpm on a Cimat VSR bench
This modification primarily affects the compressor impeller in order dto adapt the flow rate dto the air, whilst maintaining a configuration designed for direct integration.
Stage 2
Compressor impeller: MFS high-flow oversized
Intake housing: re-profiled for accommodate the new impeller
Bearing: 360° thrust bearing
Balancing: high-speed at 150,000 rpm on a Cimat VSR test bench
The housing has been re-profiled to accommodate the compressor impeller oversized. This combination aims to adapt the airflow to the new geometry without specifying a predefined final power output.
Stage 3
Compressor impeller: MFS high-flow oversized
Intake casing: reprofiled for accommodate the new impeller
Bearing: 360° thrust bearing
Turbine impeller: high-flow oversized
Turbine casing: re-profiled for ly to accommodate the new impeller
Balancing: high-speed balancing at 150,000 rpm on a Cimat VSR test bench
This version combines modifications to both the compressor and turbine sides. Larger sizing may alter the available flow rate as well as the response time; its behaviour depends on the overall engine configuration.
What is a hybrid turbocharger?
A hybrid turbo utilises a turbocharger architecture adapted for accommodate internal components that differ from the original dconfiguration. Depending on the upgrade stage, modifications may involve the impellers, their dimensions, the housings, the thrust bearing and the balancing.
The aim is dto adapt the compression capacity and air flow rate d. A hybrid turbo is therefore not defined solely by the appearance of its compressor wheel, but by the consistency of its geometry and mechanical modifications.
MFS compressor wheel: standard or Performance?
MFS stands for ‘Milled From Solid’: the impeller is machined from a solid block. This technology describes its manufacturing process and does not, on its own, guarantee an increase in air flow d.
A standard MFS impeller may retain a geometry equivalent to the original. An MFS Performance impeller can be fitted with a profile, blades or diameter tailored to the intended modification. On this product, the impeller shown is made of forged aluminium, lighter, larger and taller than the original d; it is rated for, allowing for 15 per cent additional compression.
A standard MFS impeller can be just as polished as an MFS impeller Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more d'air. A higher airflow can help to develop more power with a consistent engine set-up, though this alone does not guarantee a specific result.
Why does the geometry of the blades influence the air flow rate d?
The compressor impeller draws in and then compresses the air sent to the engine. Its diameter, profile, height, width and blade arrangement all influence its aerodynamic behaviour. The result also depends on the housings, the turbine wheel, the boost pressure and the engine tuning. A larger wheel does not automatically guarantee better performance and may alter the response time.
Reliability and balancing of the hybrid turbo
The 360° thrust bearing distributes axial forces across a surface area suited to the rotor’s stresses. Each stage presented includes this thrust bearing as well as high-speed balancing at 150,000 rpm on a Cimat VSR test bench, designed to minimise vibrations and mechanical stresses. However, this balancing does not compensate for faults in assembly or lubrication.
Engine remapping and preparation
Appropriate engine management is required for to make full use of the hybrid turbo’s characteristics. The mapping, boost pressure, injection, exhaust and cooling must be checked or adjusted according to the vehicle. The wastegate must be adjusted when remapping the ECU. The clutch, transmission and other components may also require inspection depending on the configuration.
Turbo part numbers
OEM part numbers
058145703C
058145703D
058145703DV
058145703DX
058145703E
058145703H
058145703L
058145703
058145703LX
06A145703B
06A145703HX
06A145703LX
Manufacturer’s part numbers
53039700005
53039700013
53039800005
53039800013
53039880005
53039880013
53039900005
53039900013
K03-005
Compatible vehicles and assignments
Audi
A4 Series 1 — 150 and 163 hp
1.8 i — from 1995, end date unspecified
Engine codes: unspecified
A4 Series 1 Phase 2 — 150 and 163 hp
1.8 i — from 1995, end date unspecified
Engine codes: unspecified
A4 Series 2 — 150 and 163 hp
1.8 i — from 1995, end date unspecified
Engine codes: unspecified
A4 Series 2 Phase 2 — 150 and 163 hp
1.8 i — from 1995, end date unspecified
Engine codes: unspecified
A6 Series 2 — 150 hp
1.8 i — from 1995, end date unspecified
Engine codes: unspecified
Seat
Alhambra — 150 hp
1.8 i — from 1995, end date unspecified
Engine codes: unspecified
Volkswagen
Passat B4 — 150 hp
1.8 i — from 1995, end date unspecified
Engine codes: not specified
Sharan — 150 hp
1.8i — from 1995, end date unspecified
Engine codes: not specified
Additional technical specifications
Product type: turbo hybrid
Engine: 1.8T
Power Specified: 150 to 180 hp
Fitting: plug & play, no external modifications required
Fitting advice
⚠️ WARNING — IMPORTANT BEFORE INSTALLATION
Identify and rectify the cause of the previous fault. Check the lubrication circuit, the oil supply and return lines d, the cleanliness of the pipes, and the intake, ensuring there are no foreign objects.. Prime the system in accordance with the applicable recommendations and follow the manufacturer’s instructions.. A lubrication fault that is not rectified may lead to further turbocharger failure.
How do you identify the correct turbo?
Check the turbo’s part number d, the original OEM and manufacturer part numbers, as well as the make, model, generation, engine type, power output,Year and engine code.. An identical engine type is not always sufficient to confirm compatibility.
⚠️ Check your turbo’s part numbers
Before ordering, compare the part number marked on your original turbo d with the part numbers listed in this specification sheet. An identical engine specification does not always guarantee compatibility.
If in doubt, please contact us with the part number from your turbocharger.