This hybrid turbo, designed for 2.0 TDI engines producing 140 hp, features d an internal modification designed for to adapt its compression capacity and d air flow. Depending on the upgrade package chosen, it is fitted with a high-flow MFS compressor wheel, a 360° thrust bearing and various modifications to the wheels and housings.
Its ‘ plug & play ’ installation requires no modification to the original layout d. Documented applications include the SEAT Alhambra and Volkswagen Sharan 2.0 TDI 140 from 2005 onwards.
Available formulations — Stage 1, Stage 2 and Stage 3
Stage 1
Compressor wheel: MFS high-flow
Thrust bearing system: 360° thrust bearing
Balancing: High-speed at 150,000 rpm on a Cimat VSR test bench
This modification primarily affects the compressor impeller in order d to adjust the compression and flow rate d of the air. The 360° thrust bearing helps to distribute the rotor’s axial forces more evenly.
Stage 2
Compressor impeller: MFS high-flow oversized
d' intake housing: Reprofiled for accommodate the new impeller oversized
Thrust bearing system: 360° thrust bearing
Balancing: High-speed balancing at 150,000 rpm on a Cimat VSR test bench
Stage 2 combines a oversized compressor wheel with a reprofiled housing d'admission. This configuration is designed to correctly accommodate the new wheel and adapt the airflow.
Stage 3
Compressor impeller: MFS high-flow oversized
Casing d'intake: Reprofiled for to accommodate the new impeller oversized
Thrust bearing system: 360° thrust bearing
Turbine impeller: High-flow oversized
Turbine casing: Reprofiled for ly to accommodate the new impeller oversized
Balancing: High-speed balancing at 150,000 rpm on a Cimat VSR test bench
This modification alters both the compressor and turbine sides. However, the final performance depends on the overall engine configuration, the turbocharging management system and the associated components.
What is a hybrid turbo?
A hybrid turbo is based on a turbocharger architecture adapted for to accommodate internal components that differ from the d original configuration. Depending on the stage of the upgrade, modifications may involve the compressor wheel, the turbine wheel, the housings, the thrust bearing system and the balancing.
The aim is d to adapt the compression capacity and the air flow rate d. A hybrid turbo is not defined solely by the appearance of its wheel: the geometry of the components and how they are combined are decisive.
MFS compressor wheel: standard or Performance?
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. The wheel documented here is made from forged aluminium and features a larger and taller geometry than the d ‘original’, claimed for to allow for 15 per cent additional compression.
A standard MFS wheel can retain a geometry equivalent to the original. An MFS wheel Performance can adopt a profile, dimensions or blade configuration suited to the tuning objective.
A standard MFS impeller can be just as glossy as an MFS impeller Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more d air. A higher airflow can only be utilised properly with appropriate engine tuning.
Why does the geometry of the blades influence the air flow rate d?
The compressor wheel draws in and then compresses the air sent to the engine. Its diameter, profile, height, width and the arrangement of its blades influence its aerodynamic behaviour and the amount d of air it can move under certain conditions.
The result also depends on the casings, the turbine wheel, the boost pressure and the engine management system. A larger wheel does not automatically guarantee better performance and may alter the response time as well as the range d of optimal operation.
Reliability and balancing of the hybrid turbo
The 360° thrust bearing, documented at each stage, distributes axial forces over a wide surface area. It must, however, operate with correct lubrication and under the conditions specified during preparation.
The rotor is balanced at high speed, up to 150,000 rpm, on a Cimat VSR test bench. This process aims to minimise vibrations and mechanical stresses, without compensating for incorrect installation or a fault d in the oil supply.
Engine remapping and tuning
The engine control unit must be adapted for to utilise the hybrid turbo’s characteristics and adjust the wastegate. Depending on the level of tuning, it is also advisable to check or d'adjust the fuel injection, exhaust system, cooling system, boost pressure, as well as the clutch or gearbox. The turbo alone does not guarantee a power gain.
Turbo part numbers
OEM part numbers
038253014P
03G253010E
03G253016D
Manufacturer part numbers
54399700053
54399700059
54399800053
54399800059
54399880053
54399880059
54399900053
54399900059
Compatible vehicles and assignments
SEAT
Alhambra 2.0 TDI — 140 hpDiesel engines 2.0 TDI — from 2005, end date unspecified
Engine code: not specified
Volkswagen
Sharan 2.0 TDI — 140 hpDiesel engine 2.0 TDI — from 2005, end date unspecified
Engine code: not specified
Additional technical specifications
Product type: Hybrid Turbo
Engine: 2.0 TDI
Fuel: Diesel
Power: 140 hp
Documented period: From 2005
Installation: Plug & play, no modification to the original d layout required
Installation advice
⚠️ WARNING — IMPORTANT BEFORE INSTALLATION
Before fitting, identify and rectify the cause of the previous fault. Check the lubrication circuit, the oil supply and return d as well as the cleanliness of all pipes.
Check the intake and ensure that no foreign objects can reach the turbocharger. Carry out the priming procedure in accordance with the applicable recommendations and follow the manufacturer’s instructions.
A lubrication fault that is not rectified may result in the turbocharger failing again.
How do you identify the correct turbo?
Check the part number engraved or marked on the original turbo d, then compare it with the OEM and manufacturer part numbers in this data sheet.. Also check the make, model, generation, body style, engine type, power output,Year and engine code where available.
A single engine type may be fitted with several different turbocharger set-ups: therefore, the engine type alone is not sufficient for to confirm compatibility.
⚠️ Check your turbo’s part numbers
Before ordering, compare the part number marked on your original turbo d with the part numbers listed in this data sheet. An identical engine does not always guarantee compatibility.
If in doubt, please contact us, providing the full part number of your original turbo d and your vehicle details.