This hybrid turbocharger is designed for for various engine specifications 2.0 TDI from the group Audi, Seat, Skoda and Volkswagen. . Its installation plug & play requires no external modifications, whilst its internal tuning is designed to adapt the compression capacity and dair flow to the requirements dof an optimised engine configuration.
Available modifications: the Stage 1 features a high-flow MFS compressor wheel and a 360° bearing retainer. The Stage 2 utilises a high-flow MFS wheel oversized with a reprofiled intake housing dand a 360° bearing retainer. The Stage 2+ features an even larger MFS impeller oversized, also combined with a reprofiled inlet housing dand a 360° stop. Each version benefits dfrom high-speed balancing at 150,000 rpm on a Cimat VSR test bench.
Hybrid technology: MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. A standard MFS wheel can be just as shiny as an MFS Performance wheel: it is not its appearance that determines its performance, but its geometry and its ability to move more d’air. The diameter, the profile and the blade arrangement all influence airflow and response time. The 360° stop helps to distribute axial forces more evenly, whilst rotor balancing limits vibrations and mechanical stresses.
OEM part numbers: 03L253010G, 03L253010GV, 03L253010GX, 03L253019P, 03L253019PV, 03L253019PX, 03L253056, 03L253056G, 03L253056GV, 03L253056GX, 03L253056T, 03L253056TV, 03L253056TX.
Manufacturer’s part numbers: 54409700002, 54409700007, 54409700021, 54409700036, 54409880002, 54409880007, 54409880021, 54409880036, 54409900036.
Documented applications: Audi A1 Sportback, A3 Cabriolet, A3 3-door, A3 5-door and Q3; Seat Alhambra, Altea, Altea XL and Leon II; Skoda Octavia II, Superb II and Yeti; Volkswagen Beetle , Caddy III, CC, Eos, Golf V Plus, Golf VI, Jetta IV, Passat, Passat Alltrack, Passat CC, Scirocco III, Sharan and Tiguan, depending on version, engine power and production period.
⚠️ WARNING — IMPORTANT BEFORE INSTALLATION
The cause of the previous fault must be identified and rectified. Check the lubrication circuit, the supply and return lines d, the cleanliness of the oil lines and the intake.. Carry out priming and fitting in accordance with the applicable recommendations.. The engine mapping, boost pressure, injection, exhaust, cooling and wastegate settings must be checked or adjusted to suit the chosen modification. Before ordering, compare the part number marked on your original turbo d with the part numbers in this specification sheet: an identical engine type does not always guarantee compatibility. If in doubt, please contact us with the part number noted on the turbo.