This hybrid turbocharger is designed for the following engines: Toyota 2.0 D -4D, with documented applications: for the Avensis, Corolla and Corolla Verso. A hybrid conversion adapts the turbocharger’s design to meet a specific operating objective defined by the engine modification.
The precise mechanical configuration, wheel dimensions and level of tuning are not documented in the available information. These details must therefore be verified before selecting the configuration suitable for the vehicle.
Hybrid tuning configuration
Tuning to be verified
No tuning stage or mechanical details specific to this part number are specified in the available data.
The compressor wheel, its dimensions, the blade geometry, any housing machining and modifications to the turbine section must be confirmed in accordance with the configuration ordered.
What is a hybrid turbo?
A hybrid turbo is based on a turbocharger architecture designed for accommodate internal modifications. Depending on the specification, these may involve the compressor wheel, blade geometry, casings, turbine wheel, thrust bearing system or balancing.
The aim may be dto adjust the compression capacity and the air flow rate d. However, not all of these modifications are systematically present on every hybrid turbocharger, which is not defined solely by the appearance of its compressor wheel.
MFS compressor wheel: standard or Performance?
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This designation describes a manufacturing process and does not, on its own, guarantee an increase in air flow rate d.
A standard MFS impeller may retain a geometry equivalent to that of the orig d. A Performance MFS impeller may, where specified, feature a profile, diameter or blade configuration tailored to the tuning objective.
A standard MFS impeller can be just as shiny as an MFS impeller Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more d’air. A higher airflow can contribute to power development with appropriate engine tuning, though it does not in itself guarantee a specific result.
Why does the geometry of the blades influence the air flow rate d?
The compressor impeller draws in and then compresses the air sent to the engine. Its diameter, profile, height, width and the arrangement of its blades influence its aerodynamic behaviour and its ability to move air under certain conditions.
The result also depends on the casings, the turbine wheel, the boost pressure and the engine management system. A larger wheel therefore does not automatically guarantee better performance and may alter the turbo’s response time.
Reliability and balancing of the hybrid turbo
When incorporated into a tuning package, a 360° stop helps to distribute axial forces. Its presence is not documented here and should not be assumed.
Rotor balancing is essential for to limit vibrations and mechanical stresses. However, it does not compensate for poor installation, inadequate lubrication, or the presence dof a foreign object in the dintake system.
Engine remapping and tuning
Operating da hybrid turbocharger may require adjustments to the engine mapping, boost pressure, fuel delivery, intake air cooling dand the exhaust system. The clutch, the transmission and other vehicle components must also be checked depending on the level of preparation. Fitting da hybrid turbo does not automatically guarantee a power gain without appropriate tuning.
Turbo specifications
OEM part numbers
17201-06010
17201-0G010
17201-0G01084
172010G01084
Manufacturer part numbers
727210-0001
727210-5001S
Compatible vehicles and applications
Toyota
Avensis — 2.0 D -4D — 116 hp
Engine 2.0 D -4D — from 2003, month and end date unspecified
Engine code : unspecified
Corolla — 2.0 D -4D — 110 hp
Engine 2.0 D -4D — from 2001, month and end date unspecified
Engine code : unspecified
Corolla — 2.0 D -4D — 116 hp
Engine 2.0 D -4D — from 2001, month and end date unspecified
Engine code : unspecified
Corolla Verso — 2.0 D -4D — 116 hp
Engine 2.0 D -4D — from 2004, month and end date unspecified
Engine code : unspecified
Additional technical specifications
Product type: Hybrid Turbo
Engine: 2.0 D -4D
Power: 110 or 116 hp depending on the application
Documented applications: Toyota Avensis, Corolla and Corolla Verso
Engine codes: Not specified
Fitting advice
⚠️ WARNING — IMPORTANT BEFORE INSTALLATION
Before fitting, it is essential to identify and rectify the cause of the previous fault. Check the lubrication circuit, the oil supply and return das well as the cleanliness of all pipes.
Check the inlet and ensure there are no foreign objects present. Carry out the priming procedure in accordance with the applicable recommendations and follow the vehicle manufacturer’s instructions.
A lubrication fault that is not rectified may result in the turbocharger failing again.
How do you identify the correct turbo?
Check the part number marked on the original turbo dand compare it with the OEM and manufacturer part numbers in this data sheet. Also check the model, version, engine type, power output at hp, the mountingYear and, where available, the engine code. An identical engine type does not always guarantee perfect compatibility.
⚠️ Check your turbo’s part numbers
Before ordering, compare the part number marked on your original turbo d with the part numbers listed in this data sheet. An identical engine specification does not always guarantee compatibility.
If you are unsure about the identification or the correct hybrid configuration, please contact us before ordering.