This hybrid turbo is designed for the Toyota Camry 2.0 TD engine with 86 hp, documented from 1988 onwards. Its set-up is based on a high-flow MFS compressor wheel, a 360° bearing stop and high-speed balancing, depending on the chosen stage.
Its design plug & play allows for Installation without modification of the original layout d. However, to make full use of its characteristics, appropriate engine tuning is required.
Available tuning packages — Stage 1, Stage 2 and Stage 3
Stage 1
MFS high-flow compressor wheel
360° thrust bearing
Balanced at 150,000 rpm on a Cimat VSR test bench
Stage 2
MFS high-flow compressor impeller oversized
d-intake housing, re-profiled for, to accommodate the new impeller
360° thrust bearing and balanced at 150,000 rpm on a Cimat VSR test bench
Stage 3
oversized high-flow MFS compressor impeller and d re-profiled intake housing
High-flow turbine impeller oversized and reprofiled turbine housing
360° thrust bearing and balanced at 150,000 rpm on a Cimat VSR test bench
Hybrid turbo technology
A hybrid turbo retains an architecture suited to the original ‘ d ’ layout whilst incorporating modified internal components. Depending on the upgrade package, the modifications involve the compressor wheel, the housings and the turbine wheel in order d to adapt the compression capacity and the air flow rate d.
MFS compressor wheel: standard or Performance?
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. A standard MFS wheel can be just as shiny as an MFS wheel Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more d'air. The diameter, profile, the height, width and arrangement of the blades all influence the compressor’s behaviour.
Reliability, balancing and engine preparation
The 360° stop distributes axial forces, whilst rotor balancing limits vibrations and mechanical stresses. Appropriate mapping may be required, controlling injection, boost pressure, cooling, exhaust and transmission. The wastegate must be adjusted when remapping the ECU.
Turbo part numbers
Turbo part number: CT12
OEM Reference: 17201-64040
Compatible vehicles and applications
Toyota
Camry 2.0 TD — 86 hp
2.0-litre diesel engine — from 1988, end dateunspecified
Engine code : unspecified
Additional technical specifications
Type: Hybrid Turbo
Engine: 2.0 TD
Power: 86 hp
Installation: Plug & play, no modification to the layout required
Installation advice
⚠️ WARNING — IMPORTANT BEFORE INSTALLATIONIdentify and rectify the cause of the previous fault. Check the lubrication circuit, the oil supply and return lines d, the cleanliness of the pipes, and the intake, ensuring there are no foreign objects present.. Prime the system in accordance with the applicable recommendations and follow the manufacturer’s instructions.. A lubrication fault that is not rectified may lead to further turbocharger failure.
How do you identify the correct turbo?
Check the turbo’s part number d, the original, OEM and manufacturer part numbers, the model, engine type, power output,Year and engine code.. An identical engine type does not always guarantee compatibility.
⚠️ Check your turbo’s part numbersBefore ordering, compare the part number marked on your original turbo d with the part numbers listed in this product description. An identical engine specification does not always guarantee compatibility. If in doubt, please contact us before placing your order.