This hybrid turbo is designed for a 2.8- CRD -engine producing 150 or 160 hp. A hybrid conversion aims to adapt the turbocharger’s characteristics, but the internal modifications and the specific level of conversion for this model are not specified in the available data.
Compatibility must be confirmed using the reference numbers on the original dturbocharger, as no specific vehicle or engine code is documented.
Documented hybrid tuning
Tuning level
Stage: Not specified
Internal configuration: Not specified
No Stage 1, Stage 2 or Stage 2+ models, nor any wheel dimensions, are documented. The exact configuration must therefore be verified before any engine modification.
What is a hybrid turbo?
A hybrid turbo is based on a turbocharger architecture that has been adapted to accommodate certain internal modifications. Depending on the modification, these may involve the compressor wheel, the blade geometry, the housings, the turbine wheel, the thrust bearing system or the balancing.
The aim may be to alter the compression capacity and the air flow rate d. However, not all of these modifications are necessarily present on every hybrid turbo.
A hybrid turbocharger is therefore not defined solely by the appearance of its compressor wheel: its complete mechanical configuration and its adaptation to the engine must be taken into account.
MFS compressor wheel: standard or Performance?
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This designation describes a manufacturing process and does not, on its own, guarantee an increase in air flow d. No specific wheel technology is documented here for for this product.
A standard MFS impeller may retain a geometry equivalent to that d’of the original. An MFS impeller Performance may utilise a geometry adapted to the application, for example a different profile, diameter or blade arrangement, only where these characteristics are confirmed.
A standard MFS impeller can be just as efficient as a custom- Performance MFS impeller. It is not its appearance that determines its performance, but its geometry and its ability to move more dair. A higher airflow rate can contribute to an increase in power with appropriate engine tuning, though this alone does not guarantee results.
Why does the geometry of the blades influence the air flow rate d?
The compressor impeller draws in and then compresses the air sent to the engine. Its diameter, profile, height, width and the arrangement of its blades influence its aerodynamic behaviour and its ability to move air depending on operating conditions.
The result also depends on the casings, the turbine wheel, the boost pressure and the engine management system. A larger wheel does not automatically guarantee better performance and may alter the response time as well as the optimal operating range d.
Reliability and balancing of the hybrid turbo
A 360° thrust bearing can help to distribute axial forces more evenly when included in the configuration. Its inclusion is not documented for this product.
Rotor balancing is essential for to minimise vibrations and mechanical stresses. However, it does not protect the turbocharger against lubrication failure, contamination or incorrect installation.
Engine remapping and preparation
Operating da hybrid turbo may require adjustment of the engine mapping and monitoring of boost pressure, fuel supply, intake air cooling d, the exhaust and the transmission.. The exact requirements depend on the vehicle and the chosen configuration.. Fitting da hybrid turbo does not automatically guarantee a power gain.
Turbo part numbers
OEM part numbers
05134235AA
35242103F
35242813F
Manufacturer part numbers
F40A0004
VA71
VF40A004
Compatible vehicles and applications
Applications
No make, model or production period is specified in the available data. It is essential to check the part numbers of the original turbocharger d.
Additional technical specifications
Product type: Hybrid Turbo
Engine capacity: 2.8 CRD
Power: 150 / 160 hp
Year: Not specified
Engine code: Not specified
Installation advice
⚠️ WARNING — IMPORTANT BEFORE INSTALLATION
Identify and rectify the cause of the previous fault before dinstalling the turbocharger.
dCheck the lubrication system, the oil supply and return lines, and ensure the pipes are clean. Also check the intake for any foreign objects.
Prime the turbo in accordance with the applicable recommendations and follow the vehicle manufacturer’s instructions.
A lubrication fault that is not rectified may lead to further damage to the turbocharger.
How do you identify the correct turbo?
Check the turbo part number d– the original part number, OEM and manufacturer part numbers, as well as the vehicle’s make, model, generation, body style, engine type, power output,Year and engine code. An identical engine type does not always guarantee compatibility.
⚠️ Check your turbo’s part numbers
Before ordering, compare the part number marked on your original turbo d with the part numbers listed in this data sheet. An identical engine specification does not always guarantee compatibility.
If in doubt, please contact us with the part number clearly visible on your original turbocharger d.