This hybrid turbocharger is designed for engines Mercedes-Benz 2.0 CDI between 82 and 109 hp listed in this fact sheet. Depending on the course chosen, its design is based on a high-flow MFS compressor wheel, a 360° stop and additional mechanical modifications.
The applications documented relate to Mercedes-Benz Class A A160 and A180, as well as the Class B B180. The benchmark for turbochargers d'The origin must be verified before any order is placed'.
Available products — Stage 1, Stage 2 and Stage 3
Stage 1
Compressor wheel: High-capacity MFS
Stop: 360° bearing
Balancing: high speed at 150,000 rpm on a Cimat VSR test bench
This preparation acts primarily on the compressor wheel in order to d'adjust the compression capacity and flow rate' d'air'. The 360° stop helps to distribute the axial forces applied to the rotor more evenly.
Stage 2
Compressor wheel: High-capacity MFS oversized
Carter d'Admission:' re-profiled for to receive the new wheel oversized
Stop: 360° bearing
Balancing: high speed at 150,000 rpm on a Cimat VSR test bench
The Stage 2 incorporates a compressor wheel oversized to a casing d're-profiled intake'. This modification is designed to accommodate the new geometry correctly and to increase the flow rate d'air, without prejudging the engine’s final power output'.
Stage 3
Compressor wheel: High-capacity MFS oversized
Carter d'Admission:' re-profiled for to receive the new wheel oversized
Stop: 360° bearing
Turbine wheel: high-speed oversized
Turbine casing: re-profiled for to receive the new wheel oversized
Balancing: high speed at 150,000 rpm on a Cimat VSR test bench
This configuration includes modifications to the compressor and turbine sides. The performance achieved depends on the powertrain, the turbocharging system and the associated settings; a larger wheel alone does not guarantee better results in all conditions.
What is a hybrid turbo ?
A hybrid turbo retains a turbocharger design compatible with its application whilst incorporating internal modifications tailored to a specific tuning objective. These may relate to the compressor wheel, the turbine wheel, the casings, the thrust bearing or the balancing.
The aim is d'adjust the compression capacity and flow rate' d'air'. However, a hybrid turbocharger is not defined solely by the appearance of its impeller: the geometry of the components, how they are combined and the quality of the settings are all crucial factors.
MFS compressor wheel: standard or Performance ? ?
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This term primarily describes a manufacturing process and does not, in itself, guarantee an increase in throughput d'air'.
A standard MFS wheel can retain a geometry equivalent to that d'origin'. An MFS wheel Performance may use a geometry suited to the application, with a different profile or dimensions where such modifications are specified. For this product, the stage wheels are specified as high-flow and oversized for Stages 2 and 3.
A standard MFS wheel can be just as shiny as an MFS wheel Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more d'air'. The specification provided also mentions a forged aluminium wheel, which is lighter, larger and taller than the one d'as originally intended, with an additional 15 per cent compression'.
Why does the geometry of the blades affect the flow rate? d'air?' ?
The compressor wheel draws in and then compresses the air fed to the engine. Its diameter, profile, height, width and the arrangement of its blades influence its aerodynamic behaviour and the amount d'the amount of air it can move under certain conditions'.
The result also depends on the casings, the turbine wheel, the boost pressure and the engine tuning. An increase in size may affect the response time and range d'Optimal use of the turbocharger'.
Reliability and balancing of the hybrid turbocharger
The 360° stop, which is present in all three documented stages, helps to distribute the axial forces. It does not exempt d'proper lubrication, d'a compliant assembly and d'appropriate pressure management'.
The rotor is balanced at high speed – 150,000 rpm – on a Cimat VSR test bench, in order to minimise vibrations and mechanical stresses. This balancing cannot compensate for incorrect installation, contamination of the circuit or a fault d'oil supply'.
Engine remapping and tuning
The farm d'A hybrid turbo may require adjustments to the engine mapping, boost pressure and wastegate settings'. Depending on the level of preparation, the fuel injection, exhaust, cooling, intake and transmission systems must also be checked or adjusted. The editing d'A hybrid turbo does not automatically guarantee a power boost without proper preparation'.
Turbo part numbers
OEM part numbers
6400900280
6400901380
640090138080
6400901780
640090178080
6400902380
640,090,028,080
640,090,238,080
A6400900280
A640090028080
A6400901380
A640090138080
A6400901780
A640090178080
A6400902380
A640090238080
Manufacturer’s part numbers
F40A0101
F40A0281
RHF4HVV16
VF40A0101
VF40A281
VV16
Compatible vehicles and assignments
Mercedes-Benz
A160 — 82 hp2.0 CDI — Year Published: 2004
Engine code : not specified
A160 Phase 2 — 82 hp2.0 CDI — Year documented: 2008
Engine code : not specified
A180 — 109 hp2.0 CDI — Year Published: 2004
Engine code : not specified
A180 Phase 2 — 109 hp2.0 CDI — Year documented: 2008
Engine code : not specified
B180 — 109 hp2.0 CDI — Year Published: 2005
Engine code : not specified
B180 Phase 2 — 109 hp2.0 CDI — Year documented: 2008
Engine code : not specified
Additional technical specifications
Product type: hybrid turbo
Engine: 2.0 CDI
displacement : 2.0 litres
Fuel: diesel
Documented power ratings: 82 and 109 hp
Installation: Advertised plug-and-play configuration, with no assembly modifications required
Assembly instructions
⚠️ WARNING — IMPORTANT BEFORE ASSEMBLY
Identify and rectify the cause of the previous fault before d'fit the turbo'. Check the lubrication circuit, the supply and the return d'the oil and the cleanliness of all the pipes'.
Check the intake and ensure that no foreign objects can reach the compressor. Carry out the priming in accordance with the relevant guidelines and follow the vehicle manufacturer’s instructions.
If a lubrication fault is not rectified, it may lead to the turbocharger failing again.
How do you choose the right turbo ?
Check the part number on the turbo d'origin and compare it with the OEM and manufacturer part numbers listed on this sheet'. Also check the make, model, phase and engine type 2.0 CDI, the power in hp, theYear installation code and, where available, the engine code.
An identical motor does not always guarantee compatibility, as there may be several different configurations for the same vehicle.
⚠️ Check your turbo’s part numbers
Before placing your order, Compare the part number on your turbocharger d'origin' using the references given in this fact sheet. Having the same motor does not always guarantee compatibility.
If you are unsure about the identification or application, please contact us with the reference number clearly visible on your turbocharger d'origin'.