This hybrid turbo is designed for a 1.4 D-4D engine with 90 hp. Its specification combines a high-flow MFS compressor wheel, a 360° bearing stop and high-speed balancing, with additional modifications depending on the chosen upgrade package.
Its configuration plug & play allows for an external Installation without modification. Compatibility must, however, be confirmed using the part number of the original turbocharger d.
Available tuning options — Stage 1, Stage 2 and Stage 3
Stage 1
Compressor wheel: MFS high-flow
Bearing: 360° thrust
Balancing: high-speed at 150,000 revolutions per minute on a Cimat VSR test bench
This modification primarily affects the compressor impeller in order d to adjust the compression capacity and air flow rate d whilst maintaining a direct-mount configuration.
Stage 2
Compressor impeller: MFS high-flow oversized
d intake housing: re-profiled for accommodate the new impeller oversized
Bearing: 360° thrust
Balancing: high-speed balancing at 150,000 revolutions per minute on a Cimat VSR test bench
The Stage 2 combines a oversized compressor impeller with a d intake housing adapted to the. This modification can increase the air flow rate d, but the result depends on the engine management system and the overall mechanical configuration.
Stage 3
Compressor wheel: MFS high-flow oversized
d intake housing: reprofiled for to accommodate the new impeller oversized
Bearing: 360° thrust
Turbine impeller: high-flow oversized
Turbine casing: re-profiled for ly to accommodate the new impeller oversized
Balancing: high-speed at 150,000 revolutions per minute on a Cimat VSR test bench
This version modifies the compressor and turbine sides. Larger dimensions can move more d air under certain conditions, but they may also alter the response time and the range d of optimal operation.
What is a hybrid turbo?
A hybrid turbo utilises a turbocharger architecture adapted for to accommodate modified internal components. Depending on the stage, the modification may involve the compressor wheel, the housings, the turbine wheel, the thrust bearing and the rotor balancing.
The aim is d to adapt the compression capacity and air flow rate d. However, a hybrid turbo is not defined solely by the appearance of its impeller: its performance depends on the geometry of the components, how they are combined and the engine tuning.
MFS compressor wheel: standard or Performance?
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This manufacturing process alone does not guarantee an increase in air flow d'air. A standard MFS wheel may retain a geometry close to the original, whilst an MFS Performance wheel features a geometry tailored to the tuning objective.
The wheel documented here is made from forged aluminium and features a design that is lighter, larger and taller than the d'original. The specification sheet indicates an additional compression capacity of 15 per cent. This potential requires appropriate engine tuning for to be realised.
A standard MFS impeller can be just as impressive as an MFS impeller Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more d air.
Why does the geometry of the blades influence the airflow d?
The compressor impeller draws in and then compresses the air sent to the engine. Its diameter, profile, height, width and the arrangement of its blades influence its aerodynamic behaviour and the amount d of air it can move.
The result also depends on the compressor housing, the impeller and the turbine housing, the boost pressure and the engine mapping. A larger impeller therefore does not automatically guarantee a better result and may affect response time.
Reliability and balancing of the hybrid turbo
The 360° thrust bearing distributes axial forces across a surface area suited to the rotor’s operating stresses. It is fitted to all three stages on offer.
Each tuning package undergoes high-speed balancing at 150,000 revolutions per minute on a Cimat VSR test bench. This process helps to minimise vibrations and mechanical stresses, though it does not compensate for poor installation or inadequate lubrication.
Engine remapping and tuning
The engine management system must be adapted for to make full use of the characteristics of this hybrid turbo. The mapping, boost pressure and wastegate settings must be checked during remapping.
Depending on the level of modification, it is also advisable to check or d adjust the fuel injection, exhaust system, intake air cooling d and the clutch or gearbox.. Simply fitting d a hybrid turbo does not, on its own, guarantee a power increase.
Turbo specifications
OEM part numbers
17201 0N010
17201-0N010
17201-0N010C
17201-0N030B
Manufacturer part numbers
751418-0002
751418-5002S
758870-0001
758870-5001S
766259-0001
766259-5001S
Compatible vehicles and applications
No detailed vehicle specifications are documented. Check compatibility using the turbo part numbers d(original), the engine codes 1.4 D-4D and the power output of 90 hp.
Additional technical specifications
Product type: Hybrid Turbo
Engine: 1.4 D-4D
displacement: 1.4 l
Power: 90 hp
Turbo model: GT1444V
Engine code: Not specified
Fitting period: Not specified
Fitting instructions
⚠️ WARNING — IMPORTANT BEFORE INSTALLATION
Before installation, identify and rectify the cause of the previous fault. Check the lubrication circuit, the oil supply and return d as well as the cleanliness of all pipes.
Check the inlet for any foreign objects. Prime the system in accordance with the applicable recommendations and follow the manufacturer’s instructions.
A lubrication fault that is not rectified may lead to the turbocharger failing again.
How do you identify the correct turbo?
Check the part number engraved or marked on the original turbo d, then compare it with the OEM and manufacturer part numbers in this data sheet.. Also check the make, model, generation, body style, engine type, power output at hp, production period and engine code where available.
An identical engine specification does not always guarantee compatibility: there may be several different set-ups for for the same vehicle.
⚠️ Check your turbo’s part numbers
Before ordering, compare the part number marked on your original turbo d with the part numbers listed in this data sheet. An identical engine specification does not always guarantee compatibility.
If in doubt, contact the technical support team with the full part number of your original turbo d.