This hybrid turbocharger is designed for 1-litre engines.3 CDTI, JTD, , MJTD, MJT and DDiS receive in-house training tailored to the selected work placement. The documented configurations combine a high-flow MFS compressor wheel, a 360° bearing stop and high-speed balancing.
The assignments cover, amongst other things, several models Fiat, , Lancia, , Opel and Suzuki. Compatibility must always be confirmed using the turbo’s part number d'origin'.
Available products — Stage 1, Stage 2 and Stage 3
Stage 1
Compressor wheel: High-capacity MFS
Stop: 360° thrust bearing
Balancing: High speed at 150,000 rpm on a Cimat VSR test bench
This product acts primarily on the compressor section in order to d'adjust its compression capacity and flow rate' d'air'. Its operation depends on the engine management system and the vehicle’s peripheral components.
Stage 2
Compressor wheel: High-capacity MFS oversized
Carter d'Admission:' Reprofiled for to receive the new wheel oversized
Stop: 360° thrust bearing
Balancing: High speed at 150,000 rpm on a Cimat VSR test bench
The wheel oversized requires modification of the casing d'admission'. This configuration may affect the flow rate d'airflow and the behaviour of the turbocharger, without this alone guaranteeing a specific engine power output'.
Stage 3
Compressor wheel: High-capacity MFS oversized
Carter d'Admission:' Reprofiled for to receive the new wheel oversized
Stop: 360° thrust bearing
Turbine wheel: High flow rate oversized
Turbine casing: Reprofiled for to receive the new wheel oversized
Balancing: High speed at 150,000 rpm on a Cimat VSR test bench
This procedure applies to the compressor and turbine sides. Changing the size of the impellers and reshaping the casings can affect flow capacity, response time and the optimum operating range.
What is a hybrid turbo ?
A hybrid turbo retains a suitable turbocharger design for to receive modified internal components. Depending on the course, the preparation may cover the compressor wheel, the turbine wheel, the casings, the thrust bearing system or balancing.
The aim is d'adjust the compression capacity and flow rate' d'air'. However, a hybrid turbo is not defined solely by the appearance of its impeller: it is the combination of its dimensions, profiles and mechanical adaptations that determines its performance.
MFS compressor wheel: standard or Performance ? ?
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This manufacturing process does not, on its own, guarantee an increase in throughput d'air'. A standard MFS wheel can retain a geometry equivalent to that d'origin'.
An MFS wheel Performance can be designed with a geometry suited to the preparation objective. On this product, the wheel shown is made of forged aluminium; it is lighter, larger and taller than the one d'as originally designed, with a claimed 15 per cent higher compression capacity'.
A standard MFS wheel can be just as shiny as an MFS wheel Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more d'air'. Higher power output can only be utilised effectively with appropriate engine tuning.
Why does the geometry of the blades affect the flow rate? d'air?' ?
The compressor wheel draws in and then compresses the air fed to the engine. Its diameter, profile, height, width and the arrangement of its blades all influence its aerodynamic behaviour. The right geometry can move more d'air under certain conditions'.
The result also depends on the casings, the turbine wheel, the boost pressure and the engine tuning. A larger wheel does not automatically guarantee a better result and may affect the response time.
Reliability and balancing of the hybrid turbocharger
The documented 360° bearing stop helps to distribute axial forces. It must operate with adequate lubrication and does not protect the turbocharger from the consequences d'a fault in the assembly or d'oil supply'.
The rotor is balanced at high speed – up to 150,000 rpm – on a Cimat VSR test bench, in order to minimise vibrations and mechanical stresses. This balancing does not replace circuit checks d'oil, d'admission and d'exhaust'.
Engine remapping and tuning
The farm d'A hybrid turbo requires appropriate engine management'. Mapping, boost pressure, fuel injection, the exhaust system, cooling and, depending on the vehicle, the transmission must be checked or adjusted. The wastegate must be adjusted when remapping the ECU. The turbo alone does not guarantee any specific increase in power.
Turbo part numbers
OEM part numbers
5860030
71724166
71784113
71784115
71794552
73501343
93191993
71724702
Manufacturer’s part numbers
54359700005
54359800005
54359880005
54359900005
KP35-005
Compatible vehicles and assignments
Fiat
500 / 500 C — 1.3 MJTD 95 hp
From 2012, end date unspecified — Engine code : not specified
Albea — 1.3 JTD 70 hp
From 2002, end date unspecified — Engine code : not specified
Doblo — 1.3 CDTI 70 hp
From 2003, end date unspecified — Engine code : not specified
Doblo — 1.3 MJTD 70 hp
From 2004, end date unspecified — Engine code : not specified
Doblo 2–1.3 MJTD 75 hp
From 2006, end date unspecified — Engine code : not specified
Doblo Cargo 2 — 1.3 MJTD 75 hp
From 2006, end date unspecified — Engine code : not specified
Fiorino — 1.3 CDTI 75 hp
From 2003, end date unspecified — Engine code : not specified
Grande Punto — 1.3 CDTI 70 hp
From 2003, end date unspecified — Engine code : not specified
Grande Punto (199) — 1.3 MJTD 75 hp
From 2005, end date unspecified — Engine code : not specified
Grande Punto — 1.3 MJTD 75 hp
From 2005, end date unspecified — Engine code : not specified
Grande Punto Current (199/299) — 1.3 MJTD 75 hp
From 2009, end date unspecified — Engine code : not specified
Grande Punto Van — 1.3 MJTD 75 hp
From 2005, end date unspecified — Engine code : not specified
Idea — 1.3 CDTI 70 hp
From 2003, end date unspecified — Engine code : not specified
Idea — 1.3 JTD 70 hp
From 2003, end date unspecified — Engine code : not specified
New Fiorino — 1.3 MJTD 75 hp
From 2007, end date unspecified — Engine code : not specified
Nuova 500 — 1.3 MJTD 75 hp
From 2007, end date unspecified — Engine code : not specified
Nuova 500C — 1.3 MJTD 75 hp
From 2009, end date unspecified — Engine code : not specified
Panda — 1.3 CDTI 70 hp
From 2003, end date unspecified — Engine code : not specified
Panda (169) — 1.3 JTD 70 hp
From 2003, end date unspecified — Engine code : not specified
Panda (169) — 1.3 MJTD 75 hp
From 2003, end date unspecified — Engine code : not specified
Panda (169) Phase 2 — 1.3 MJTD 70 hp
From 2009, end date unspecified — Engine code : not specified
Punto — 1.3 CDTI 70 hp
From 2003, end date unspecified — Engine code : not specified
Point II (188) — 1.3 JTD 70 hp
From 2003, end date unspecified — Engine code : not specified
Punto Evo — 1.3 MJT 75 hp
From 2009, end date unspecified — Engine code : not specified
Qubo — 1.3 JTD 75 hp
From 2008, end date unspecified — Engine code : not specified
Qubo — 1.3 MJT 75 hp
From 2009, end date unspecified — Engine code : not specified
Lancia
Musa — 1.3 MJTD 70 hp
From 2004, end date unspecified — Engine code : not specified
Ypsilon — 1.3 MJTD 70 hp
From 2003, end date unspecified — Engine code : not specified
Ypsilon — 1.3 MJTD 75 hp
From 2003, end date unspecified — Engine code : not specified
Opel
Agila A — 1.3 CDTI 70 hp
From 2002, end date unspecified — Engine code : not specified
Agila 2 — 1.3 CDTI 75 hp
From 2007, end date unspecified — Engine code : not specified
Agila B — 1.3 CDTI 70 hp
From 2008, end date unspecified — Engine code : not specified
Combo C Phase 2 — 1.3 CDTI 70 hp
From 2002, end date unspecified — Engine code : not specified
Combo Tour Phase 2 — 1.3 CDTI 70 hp
From 2002, end date unspecified — Engine code : not specified
Combo 3 Phase 2 — 1.3 CDTI 75 hp
From 2004, end date unspecified — Engine code : not specified
Combo Tour Phase 2 — 1.3 CDTI 75 hp
From 2004, end date unspecified — Engine code : not specified
Corsa 2 — 1.3 CDTI 70 hp
From 2003, end date unspecified — Engine code : not specified
Corsa C — 1.3 CDTI 70 hp
From 2003, end date unspecified — Engine code : not specified
Corsa C — 1.3 CDTI 70 hp
From 2005, end date unspecified — Engine code : not specified
Corsa D — 1.3 CDTI 75 hp
From 2006, end date unspecified — Engine code : not specified
Meriva A — 1.3 CDTI 70/75 hp
From 2003, end date unspecified — Engine code : not specified
Meriva — 1.3 CDTI 69/70 hp
From 2005, end date unspecified — Engine code : not specified
Tigra TwinTop — 1.3 CDTI 70 hp
From 2004, end date unspecified — Engine code : not specified
Suzuki
Ignis — 1.3 DDiS 70 hp
From 2003, end date unspecified — Engine code : not specified
Splash — 1.3 DDiS 75 hp
From 2008, end date unspecified — Engine code : not specified
Swift 2 RS — 1.3 DDiS 75 hp
From 2005, end date unspecified — Engine code : not specified
Swift II RS — 1.3 DDiS 70 hp
From 2005, end date unspecified — Engine code : not specified
RB carriage — 1.3 DDiS 70 hp
From 2002, end date unspecified — Engine code : not specified
Additional technical specifications
Type: Hybrid Turbo
Engine options: 1.3 CDTI, JTD, , MJTD, MJT and DDiS
Documented power ratings: 69 to 95 hp depending on the allocation
Editing: Configuration plug & play, with no documented external changes
Engine codes: Not specified
Assembly instructions
⚠️ WARNING — IMPORTANT BEFORE ASSEMBLY
Identify and rectify the cause of the previous fault. Check the power supply and the return d'the oil and the overall cleanliness of the lubrication system'.
Check the intake, the pipes, the exhaust and ensure there are no foreign objects. Carry out the priming in accordance with the relevant guidelines and follow the manufacturer’s instructions.
If a lubrication fault is not rectified, it may lead to the turbocharger failing again.
How do you choose the right turbo ?
Check the part number marked on the turbocharger d'origin', then compare the OEM and manufacturer part numbers. Also check the make, model, generation, body style, engine type, power output, andYear the mounting code and the engine code, where available.
The same engine can be fitted with several different turbocharger set-ups. The reference d'Origin' therefore remains the primary criterion for verification.
⚠️ Check your turbo’s part numbers
Before placing your order, Compare the part number on your turbocharger d'origin' using the references given in this fact sheet. Having the same motor does not always guarantee compatibility.
If you’re unsure, please contact us with the reference number shown on your turbo d'Vehicle origin and details'.