This Stage 2 hybrid turbo is designed for a 2.4 JTD engine with a capacity of 200 hp. This modification aims to adapt the turbocharger’s characteristics to a specific engine project; however, the final power output cannot be deduced from the stage level alone.
The available part numbers must be compared with those of the original turbo d before placing any order. Detailed mechanical specifications and vehicle applications are not specified in the available information.
Tuning available — Stage 2
Stage 2
Tuning type: Hybrid Turbo Stage 2
Engine: 2.4 JTD
Power Documented engine: 200 hp
The Stage 2 level is documented, but the impeller dimensions, blade geometry, casing machining and other internal modifications are not specified. No power gain can therefore be claimed without further data and without a suitable engine configuration.
What is a hybrid turbo?
A hybrid turbo is based on a turbocharger design adapted for to accommodate internal modifications. Depending on the modification, these may involve the compressor wheel, blade geometry, casings, turbine wheel, thrust bearing system or balancing.
The aim may be to alter the compression capacity and air flow rate d. However, a hybrid turbo is not defined solely by the appearance of its compressor wheel: its performance depends on its entire mechanical configuration.
MFS compressor wheel: standard or ‘ Performance ’?
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This manufacturing process alone does not guarantee an increase in air flow d. A standard MFS wheel may retain a geometry close to the d original, whilst an MFS Performance wheel may adopt a geometry tailored to the tuning objective.
A standard MFS impeller can be just as shiny as an MFS impeller Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more d'air. As the presence d'of an MFS impeller Performance is not documented here, it cannot be attributed to this product.
Why does the blade geometry influence the air flow rate d?
The diameter of the compressor impeller, its profile, the height, width and arrangement of its blades all influence the intake and compression of air. The result also depends on the casings, the turbine impeller, the boost pressure and the engine tuning. A larger impeller does not automatically guarantee better performance and may alter the response time.
Reliability and balancing of the hybrid turbo
Rotor balancing helps to limit vibrations and mechanical stresses at high speeds. A 360° thrust bearing can distribute axial forces when included in the modification, but its inclusion is not specified for this product. Balancing does not compensate for faulty installation or lubrication.
Engine remapping and tuning
Operating d a hybrid turbo may require adjustments to the mapping, boost pressure, fuel supply, intake air cooling d, the exhaust or the transmission. The configuration must be assessed by a professional based on the vehicle and its intended use.
Turbo part numbers
Compatible vehicles and applications
Applications to be verified
No model, production period or engine code is documented. The sole reference to ‘ d ’ an engine with 2,., 4, JTD, 200 hp, does not allow for confirmation of vehicle compatibility.
Additional technical specifications
Product type: Hybrid Turbo
Preparation: Stage 2
.Engine type: 2- 4- JTD
Power: 200 hp
displacement: 2.4 l
Engine code: Not specified
Production period: Not specified
Fitting instructions
⚠️ WARNING — IMPORTANT BEFORE INSTALLATION
Identify and rectify the cause of the previous fault. Check the lubrication circuit, the oil supply and return lines d, the cleanliness of the pipes, and the intake, ensuring there are no foreign objects present.. Prime the system in accordance with the applicable recommendations and follow the manufacturer’s instructions.. A lubrication fault that is not rectified may lead to further damage to the turbocharger.
How do you identify the correct turbo?
Check the turbo’s part number d – the original part number, OEM and manufacturer part numbers, as well as the make, model, generation, body style, engine type, power output,Year and engine code. An identical engine type does not always guarantee compatibility.
⚠️ Check your turbo’s part numbers
Before ordering, compare the part number marked on your original turbo d with the part numbers listed in this specification sheet. An identical engine specification does not always guarantee compatibility. If in doubt, please contact us with the part number taken from your turbo.