This hybrid turbocharger is available in three tuning levels, featuring a high-flow MFS compressor wheel, a 360° bearing stop and high-speed balancing. The modifications vary depending on the selected tuning stage in order dto adapt the air flow dand the turbocharger’s performance.
It is suitable for the applications documented at Fiat for 1.4 TD and 1.7 TD/TDS engines, notably the Fiorino, Palio Weekend, Punto Van, Strada Pickup and Uno.
Available specifications — Stage 1, Stage 2 and Stage 3
Stage 1
Compressor wheel: MFS high-flow
Bearing: 360° thrust
Balancing: high-speed at 150,000 rpm on a Cimat VSR bench
This modification affects the compressor impeller in order dto adjust the compression capacity and air flow rate d, whilst retaining the other modifications specified for for this upgrade.
Stage 2
Compressor impeller: MFS high-flow oversized
Intake casing d: re-profiled for accommodate the new impeller oversized
Bearing: 360° thrust
Balancing: high-speed at 150,000 rpm on a Cimat VSR test bench
The reprofiling of the intake d’ housing allows d’ to fit the compressor wheel oversized. This configuration may alter the air flow d’ and the turbo’s response depending on the associated engine tuning.
Stage 3
Compressor wheel: MFS high-flow oversized
d’ intake housing: re-profiled for to accommodate the new impeller oversized
Bearing: 360° thrust
Turbine wheel: high-flow oversized
Turbine casing: re-profiled for ly to accommodate the new impeller oversized
Balancing: high-speed at 150,000 rpm on a Cimat VSR test bench
This upgrade involves modifications to both the compressor and turbine sides. The sizing of the impellers and the re-profiling of the housings must be considered in relation to the overall engine configuration, as they can influence both flow rate and response time.
What is a hybrid turbo?
A hybrid turbo is based on a turbocharger architecture adapted for accommodate modified internal components. Depending on the stage, the modification may involve the compressor wheel, the turbine wheel, the housings, the thrust bearing and balancing.
The aim is dto adapt the compression capacity and air flow rate d. A hybrid turbo is therefore not defined solely by the appearance of its compressor wheel, but by the coherence of its geometry and the mechanical modifications carried out.
MFS compressor wheel: standard or Performance?
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This manufacturing process alone does not guarantee an increase in airflow d. A standard MFS wheel may retain a geometry equivalent to that dof the original.
A standard MFS impeller can be just as shiny as an MFS impeller Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more d’air. On this product, the impeller shown is made of forged aluminium; it is lighter, larger and taller than the original, with a claimed 15 per cent higher compression capacity. However, its effective use depends don appropriate engine tuning.
Why does the geometry of the blades influence the air flow rate d?
The compressor impeller draws in and then compresses the air. Its diameter, profile, height, width and arrangement of its blades all influence its aerodynamic behaviour. The result also depends on the casings, the turbine, the boost pressure and the engine management system. A larger impeller does not automatically guarantee better performance and may alter the response time.
Reliability and balancing of the hybrid turbocharger
The 360° thrust bearing helps to distribute the axial forces exerted on the rotating assembly. TBalancing at 150,000 rpm on a Cimat VSR test bench aims to limit vibrations and mechanical stresses on the rotor. However, it does not compensate for poor installation or inadequate lubrication.
Engine remapping and preparation
Adjustments to the engine mapping and boost pressure management are required for to make the most of the turbo’s performance. The fuel injection, exhaust, cooling, intake and transmission must be checked in line with the level of tuning. The wastegate must be adjusted when remapping the ECU. No power gain is automatic without a coherent configuration.
Turbo specifications
OEM part numbers
46408952
46424102
7553387
75533870
76125850
Manufacturer’s part numbers
466856-0001
466856-0002
466856-0003
466856-0004
466856-0005
466856-5003S
TB0227
Compatible vehicles and assignments
Fiat
Fiorino 2 — 1.7 TDS —63 hp
From 1993, end dateunspecified
Engine code : unspecified
Palio Weekend — 1.7 TD — 64 hp
From 1997, end date unspecified
Engine code : unspecified
Palio Weekend — 1.7 TD — 70 hp
From 1997, end date unspecified
Engine code : unspecified
Punto Van — 1.7 TD — 63 hp
From 1994, end date unspecified
Engine code : unspecified
Punto Van — 1.7 TD — 70 hp
From 1994, end date unspecified
Engine code : unspecified
Punto Van — 1.7 TD — 72 hp
From 1994, end date unspecified
Engine code : unspecified
Strada Pickup — 1.7 TDS — 70 hp
From 1999, end date unspecified
Engine code : unspecified
Uno — 1.4 TD — 70 hp
From 1990, end date unspecified
Engine code : unspecified
Additional technical specifications
Product type: hybrid turbo
Internal reference: TB0227
Documented engine variants: 1,., 4, TD and 1,., 7, TD/TDS
Documented power outputs: 63, 64, 70 and 72 hp
Installation: plug & play configuration, without any modifications to the assembly
Fitting advice
⚠️ WARNING — IMPORTANT BEFORE INSTALLATION
Identify and rectify the cause of the previous fault. Check the lubrication circuit, as well as the oil supply and return d. Check that the pipes are clean, the inlet and that there are no foreign objects. Prime the system in accordance with the applicable recommendations and follow the manufacturer’s instructions. A lubrication fault that is not rectified may lead to further turbocharger failure.
How do you identify the correct turbo?
Check the turbo’s part number d, the original, OEM and manufacturer part numbers, as well as the make, model, body style, engine type, power output,Year and engine code.. An identical engine type is not always sufficient to confirm compatibility.
⚠️ Check your turbo’s part numbers
Before ordering, compare the part number marked on your original turbo d with the part numbers listed in this specification sheet. An identical engine specification does not always guarantee compatibility. If in doubt, please contact us before placing your order.