This GTA1749V hybrid turbocharger is designed for use with a range of engines Renault 1.9 dCi. Depending on the upgrade package chosen, the modification involves a high-flow MFS compressor wheel, a 360° bearing stop and internal modifications tailored to the purpose of the upgrade.
The documented assignments relate in particular to Renault Grand Scénic 2, Laguna 2 Phase 2, Mégane 2 and Scénic 2. Installation is designed to require no modifications to the mounting, provided that the correct part number and version for the vehicle are selected.
Available products — Stage 1, Stage 2 and Stage 3
Stage 1
Compressor wheel: High-capacity MFS
Bearing stop: 360°
Balancing: high speed at 150,000 rpm on a Cimat VSR test bench
This preparation acts primarily on the compressor wheel’s ability to move air. Its final behaviour depends on the engine management system and all the vehicle’s components.
Stage 2
Compressor wheel: High-capacity MFS oversized
Carter d'Admission:' re-profiled for to receive the new wheel oversized
Bearing stop: 360°
Balancing: high speed at 150,000 rpm on a Cimat VSR test bench
The wheel oversized requires a casing d're-profiled intake'. This combination is designed to adjust the airflow and compression, although it does not, on its own, guarantee a specific power output.
Stage 3
Compressor wheel: High-capacity MFS oversized
Carter d'Admission:' re-profiled for to receive the new wheel oversized
Bearing stop: 360°
Turbine wheel: high-speed oversized
Turbine casing: re-profiled for to receive the new wheel oversized
Balancing: high speed at 150,000 rpm on a Cimat VSR test bench
This course covers modifications to both the compressor and turbine sides. Oversizing can affect the flow rate d'air, conditions d'Optimal utilisation and response time of the turbocharger'.
What is a hybrid turbo ?
A hybrid turbo is based on a specially adapted turbocharger design for to receive internal components that differ from the configuration d'origin'. Depending on the course, the preparation may involve the compressor wheel, the casings, the turbine wheel, the thrust bearing and balancing.
The aim is d'adjust the compression capacity and flow rate' d'air'. A hybrid turbo is not defined solely by the appearance of its impeller: the geometry, dimensions, machining of the housings and the overall balance are also crucial factors.
MFS compressor wheel: standard or Performance ? ?
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This manufacturing process does not, on its own, guarantee an increase in throughput d'air'. A standard MFS wheel can retain a geometry equivalent to that d'origin'.
An MFS wheel Performance can be designed with a geometry suited to the preparation objective. A standard MFS wheel can be just as shiny as an MFS wheel Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more d'air'. Higher power output can only be utilised effectively with appropriate engine tuning.
Why does the geometry of the blades affect the flow rate? d'air?' ?
The compressor wheel draws in and then compresses the air fed to the engine. Its diameter, profile, height, width and the arrangement of the blades all influence its aerodynamic behaviour. The right geometry can move more d'air under certain conditions, but the result also depends on the casings, the turbine, the boost pressure and the mapping'. A larger wheel therefore does not automatically guarantee better performance and may affect response time.
Reliability and balancing of the hybrid turbocharger
The 360° stop, as documented in each module, distributes the axial forces around the axis. High-speed balancing at 150,000 rpm on a Cimat VSR test bench is designed to minimise vibrations and stresses in the rotor. However, it does not protect the turbocharger against a lack of lubrication, a foreign object or incorrect installation.
Engine remapping and tuning
The engine management system needs to be adjusted for make the most of the hybrid turbo’s features. Mapping, boost pressure, fuel injection, exhaust and cooling must be monitored or adjusted according to the level of tuning. The wastegate must be adjusted when remapping the ECU. The clutch, gearbox and other components should also be checked, depending on the vehicle and how it is used.
Turbo part numbers
Manufacturer part numbers and cross-references
7701476528
7701478023
7701479254
7711497573
8.200.398.585
8.200.475.873C
8.200.507.286
8.200.631.167
8.200.683.857
8.200.732.947
8.200.901.185A
8200398585
8200475873
8200475873C
8200507286
8200631167
8200683857
8200732947
8200901185
8200901185A
Manufacturer’s part numbers
755507-0001
755507-0002
755507-0003
755507-0006
755507-0007
755507-0008
755507-0009
755507-5001S
755507-5002S
755507-5003S
755507-5006S
755507-5007S
755507-5008S
755507-5009S
Compatible vehicles and assignments
Renault
Grand Scénic 2 — 110/115 hp
1.9 dCi — from 2004, end date unspecified
Engine code : not specified
Grand Scénic 2 — 125/130 hp
1.9 dCi — from 2004, end date unspecified
Engine code : not specified
Laguna 2 Phase 2 — 107 hp
1.9 dCi — from 2005, end date unspecified
Engine code : not specified
Laguna 2 Phase 2 — 130 hp
1.9 dCi — from 2005, end date unspecified
Engine code : not specified
Mégane 2 — 110/115 hp
1.9 dCi — from 2002, end date unspecified
Engine code : not specified
Mégane 2 — 130 hp
1.9 dCi — from 2002, end date unspecified
Engine code : not specified
Scénic 2 — 110 hp
1.9 dCi — from 2003, end date not specified
Engine code : not specified
Scénic 2 — 130 hp
1.9 dCi — from 2003, end date not specified
Engine code : not specified
Additional technical specifications
Product type: hybrid turbo
Turbo family: 755507
Turbo model: GTA1749V
Engine: 1.9 dCi
Documented power ratings: 107, 110, 115, 125 and 130 hp
Documented periods: from 2002 onwards, depending on the allocation
Editing: installation to be carried out without modification
Assembly instructions
⚠️ WARNING — IMPORTANT BEFORE ASSEMBLY
Before installation, identify and rectify the cause of the previous fault. Check the lubrication circuit, the supply and the return d'the oil and the cleanliness of all the pipes'. Check the intake and ensure there are no foreign objects present. Carry out the priming in accordance with the relevant guidelines and follow the manufacturer’s instructions. If a lubrication fault is not rectified, it may lead to the turbocharger failing again.
How do you choose the right turbo ?
Check the reference number engraved on the turbo d'origin and compare it with the OEM and manufacturer part numbers listed on this sheet'. Also check the make, model, generation, engine type, power output, andYear the mounting code and the engine code, where available. Having the same motor does not always guarantee compatibility.
⚠️ Check your turbo’s part numbers
Before placing your order, Compare the part number on your turbocharger d'origin' using the references given in this fact sheet. Having the same motor does not always guarantee compatibility.
If in doubt, please contact us with the full turbo part number d'Vehicle origin and details'.