This hybrid turbo for diesel engines 2.0 The TDCi is available in several trim levels. Depending on the package selected, it comes with a high-flow MFS compressor wheel, a 360° bearing retainer and high-speed balancing carried out on a Cimat VSR test bench.
The documented assignments relate in particular to Ford Mondeo III, Ford Transit and Jaguar X-Type with 115, 125 or 130 hp. The assembly is designed for be carried out without any external modifications to the vehicle.
Available products — Stage 1, Stage 2 and Stage 2+
Stage 1
Compressor wheel: High-capacity MFS
Stop system: 360° bearing stop
Balancing: high speed at 150,000 rpm on a Cimat VSR test bench
This procedure is designed to adjust the compression capacity and flow rate d'air whilst retaining a configuration designed for a Installation without modification outdoor.
Stage 2
Compressor wheel: High-capacity MFS oversized
Carter d'Admission:' reprofiled for to receive the new wheel oversized
Stop system: 360° bearing stop
Balancing: high speed at 150,000 rpm on a Cimat VSR test bench
The wheel oversized and the reshaping of the casing adapts the passage d'air in this configuration'. The final performance depends on the engine management system and the other components of the tuning package.
Stage 2+
Compressor wheel: High-capacity MFS oversized
Carter d'Admission:' reprofiled for to receive the new wheel oversized
Stop system: 360° bearing stop
Balancing: high speed at 150,000 rpm on a Cimat VSR test bench
The documented features include an MFS wheel oversized and a casing d're-profiled intake'. The choice of test bench must be consistent with the engine’s overall configuration.
What is a hybrid turbo ?
A hybrid turbo utilises a suitably adapted turbocharger design for to receive internal changes. Depending on the specific application, these may relate to the compressor wheel, its dimensions, the casings, the thrust bearing system or the balancing of the rotor.
The aim is d'adjust the compression capacity and flow rate' d'air'. However, a hybrid turbocharger is not defined solely by the appearance of its impeller: the overall mechanical integrity remains the decisive factor.
MFS compressor wheel: standard or Performance ? ?
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This manufacturing process does not, on its own, guarantee an increase in throughput d'air'. A standard MFS wheel can retain a geometry equivalent to that d'origin'.
A standard MFS wheel can be just as shiny as an MFS wheel Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more d'air'. Appropriate geometry can support a higher flow rate when combined with appropriate engine tuning, although it does not in itself guarantee a power gain.
Why does the geometry of the blades affect the flow rate? d'air?' ?
The diameter of the impeller, its profile, height, width and the arrangement of the blades all influence the intake and compression of air. The result also depends on the compressor housing, the turbine section, the boost pressure and the engine management system. A larger wheel can also affect response time and is therefore not automatically the best choice for every time it is used.
Reliability and balancing of the hybrid turbocharger
The documented 360° stop distributes axial forces over a wide area. The rotor is balanced at high speed – up to 150,000 rpm – on a Cimat VSR test bench in order to minimise vibrations and mechanical stresses. This balancing does not exempt one from d'proper assembly nor' d'a lubrication system in perfect working order'.
Engine remapping and tuning
The mapping and management of boost pressure need to be adjusted for make the most of the hybrid turbo’s features. The wastegate must be adjusted during remapping. Depending on the level of preparation, the fuel injection, exhaust, cooling, intake and transmission systems must also be checked or adjusted.
Turbo part numbers
OEM part numbers
RE3S7Q6K682AF
JDE4957
C2S36491
3S7Q6K682AF
3S7Q6K682AE
3S7Q6K682AD
3S7Q6K682AC
2S7Q6K682AJ
2S7Q6K682AG
2S7Q6K682AF
2S7Q6K682AE
2S7Q6K682AD
2S7Q6K682AC
1789089
1435150
1383646
1358492
1348169
1319518
1256751
1219649
1202122
1132648
Manufacturer’s part numbers
714467-0004
714467-0007
714467-0008
714467-0012
714467-0013
714467-0014
714467-12
714467-13
714467-14
714467-2014
714467-4
714467-5013S
714467-5014S
714467-5015S
714467-7
714467-8
Compatible vehicles and assignments
Ford
Mondeo III (B5Y) — 115 hp
Diesel — October 2000 to March 2007
Engine codes: D6BA, HJBA, HJBB, HJBC, HJBE
Mondeo III (B5Y) — 130 hp
Diesel — October 2001 to March 2007
Engine codes: FMBA, N7BA, N7BB
Mondeo III Saloon (B4Y) — 115 hp
Diesel — October 2000 to March 2007
Engine codes: D6BA, HJBA, HJBB, HJBC, HJBE
Mondeo III Saloon (B4Y) — 130 hp
Diesel — October 2001 to March 2007
Engine codes: FMBA, N7BA, N7BB
Mondeo III Turnier (BWY) — 115 hp
Diesel — October 2000 to March 2007
Engine codes: D6BA, HJBA, HJBB, HJBC, HJBE
Mondeo III Turnier (BWY) — 130 hp
Diesel — October 2001 to March 2007
Engine codes: FMBA, N7BA, N7BB
Transit Bus (FD_ _, FB_ _, FS_ _, FZ_ _) — 125 hp
Diesel — August 2002 to May 2006
Engine code : FIFA
Transit Platform/Chassis (FM_ _, FN_ _) — 125 hp
Diesel — August 2002 to May 2006
Engine code : FIFA
Transit Van (FA_ _) — 125 hp
Diesel — August 2002 to May 2006
Engine code : FIFA
Jaguar
X-Type I (X400) — 130 hp
Diesel — July 2003 to November 2009
Engine codes: FMBA, FMBB
X-Type I Estate (X400) — 130 hp
Diesel — February 2004 to December 2009
Engine codes: FMBA, FMBB
Additional technical specifications
Product type: hybrid turbo
Engine: 2.0 TDCi
Fuel: diesel
Documented power ratings: 115, 125 and 130 hp
Documented periods: October 2000 to December 2009, depending on the assignment
Engine codes: D6BA, HJBA, HJBB, HJBC, HJBE, FMBA, FMBB, N7BA, N7BB, FIFA
Assembly instructions
⚠️ WARNING — IMPORTANT BEFORE ASSEMBLY
Identify and rectify the cause of the previous fault before d'fit the turbo'. Check the lubrication circuit, the supply and the return d'the oil and the cleanliness of all the pipes'.
Check the intake and ensure there are no foreign objects present. Carry out the priming in accordance with the relevant guidelines and follow the vehicle manufacturer’s instructions.
If a lubrication fault is not rectified, it may lead to the turbocharger failing again.
How do you choose the right turbo ?
Check the reference number engraved or marked on the turbocharger d'original', then compare it with the OEM and manufacturer part numbers listed on this sheet. Also check the make, model, generation, body style, power output, years of manufacture and engine code. Having the same motor does not always guarantee compatibility.
⚠️ Check your turbo’s part numbers
Before placing your order, Compare the part number on your turbocharger d'origin' using the references given in this fact sheet. Having the same motor does not always guarantee compatibility.
If in doubt, please contact our team, quoting the full turbo part number d'Vehicle origin and details'.