This hybrid turbo for engine options Ford 2.0 DI, TDCi and TDDi with 90 and 115 hp benefits from d’a mechanical process designed to increase throughput’ dair. The proposed configurations utilise a high-flow MFS compressor wheel, a 360° bearing retainer and high-speed balancing.
It is intended for the various documented versions of the Ford Mondeo 2 and the Mondeo Phase 2 from 2000 onwards. Its design plug & play enables a Installation without modification external, subject to a thorough check of the turbo’s specifications d’origin’.
Available products — Stage 1, Stage 2 and Stage 3
Stage 1
Compressor wheel: High-throughput MFS
Stop: 360° bearing
Balancing: high speed at 150,000 rpm on a Cimat VSR test bench
This preparation acts primarily on the compressor wheel in order to d’adjust the compression capacity and flow rate’ dair. Its operation must remain consistent with the engine management system and the vehicle’s other components.
Stage 2
Compressor wheel: High-throughput MFS oversized
Carter d’Admission:’ re-profiled for to receive the new wheel
Stop: 360° bearing
Balancing: high speed at 150,000 rpm on a Cimat VSR test bench
The Stage 2 incorporates a compressor wheel oversized to a casing d’re-profiled intake’. This modification is designed to accommodate the new geometry correctly and may affect the flow rate d’air and the behaviour of the compressor.
Stage 3
Compressor wheel: High-throughput MFS oversized
Carter d’Admission:’ re-profiled for to receive the new wheel
Turbine wheel: high-speed oversized
Turbine casing: re-profiled for to receive the new wheel
Stop: 360° bearing
Balancing: high speed at 150,000 rpm on a Cimat VSR test bench
This configuration includes modifications to both the compressor and turbine sides. Selecting a larger size may increase flow capacity under certain conditions, but may also affect the response time and the range d’Optimal use of the turbocharger’.
What is a hybrid turbo ?
A hybrid turbo utilises a suitably adapted turbocharger design for to receive modified internal components. Depending on the course, the preparation may involve the compressor wheel, the casings, the turbine wheel, the thrust bearing system and balancing.
The aim is d’adjust the compression capacity and flow rate’ dair. However, a hybrid turbocharger is not defined solely by the appearance of its impeller: the geometry of the components and their mechanical compatibility are crucial.
MFS compressor wheel: standard or Performance ? ?
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This technology describes its manufacturing process and does not, on its own, guarantee an increase in throughput dair.
A standard MFS wheel can retain a geometry equivalent to the original. An MFS wheel Performance can be fitted with a profile, blade height, width or diameter suited to the preparation objective. On this product, the wheel is described as being made of forged aluminium; it is lighter, larger and taller than the one d’original, with a claimed compression capacity 15 per cent higher.
A standard MFS wheel can be just as shiny as an MFS wheel Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more dair. A higher flow rate can contribute to power development with the appropriate engine tuning, although this alone does not guarantee a specific result.
Why does the geometry of the blades affect the flow rate? d’air ?
The compressor wheel draws in and then compresses the air fed to the engine. Its diameter, profile, height, width and the arrangement of the blades all influence its aerodynamic behaviour. The result also depends on the casings, the turbine wheel, the boost pressure and the engine tuning. A larger wheel therefore does not automatically guarantee better performance and may affect response time.
Reliability and balancing of the hybrid turbocharger
The 360° bearing stop helps to distribute the axial forces acting on the rotating assembly. It helps to manage the stresses associated with preparation without making the turbocharger immune to faults in assembly or lubrication.
Each documented bearing is subjected to high-speed balancing at 150,000 rpm on a Cimat VSR test bench. The aim of this operation is to minimise vibrations and mechanical stresses on the rotor.
Engine remapping and tuning
The farm dA hybrid turbo requires appropriate engine management. Mapping, boost pressure, fuel injection, air cooling d’The intake, exhaust and transmission must be checked in accordance with the level of preparation’. The wastegate must be adjusted when the ECU is remapped. A turbocharger does not automatically guarantee a power increase without proper tuning.
Turbo part numbers
OEM part numbers
1101619
1C1Q6K682DB
1C1Q6K682EA
1C1Q6K682EB
1S7Q6K682AD
1S7Q6K682AE
1S7Q6K682AF
1S7Q6K682AJ
1S7Q6K682AK
1SQ7K682AG
1SQ7K682AJ
1SQ7K682AK
2C1Q6K682BA
2C1Q6K682BB
2C1Q6K682BC
2C1Q6K682BD
2C1Q6K682BE
Manufacturer’s part numbers
708618-0004
708618-0005
708618-0006
708618-0007
708618-0009
708618-0011
708618-5009S
708618-5011S
709035-0001
709035-0004
709035-0005
709035-5001S
709035-5004S
709035-5005S
714716-0003
714716-5003S
726194-0001
726194-0002
726194-0003
726194-0004
726194-0005
726194-5001S
726194-5002S
726194-5003S
726194-5004S
726194-5005S
802419-5001S
802419-5002S
802419-5003S
802419-5004S
802419-5005S
Compatible vehicles and assignments
Ford
Mondeo 2 — 2.0 DI — 90 and 115 hp
Engine 2.0 DI — from 2000, end date unspecified
Engine code : not specified
Mondeo 2 — 2.0 TDDi — 90 hp
Engine 2.0 TDDi — from 2000, end date unspecified
Engine code : not specified
Mondeo 2 — 2.0 TDCi — 115 hp
Engine 2.0 TDCi — from 2000, end date unspecified
Engine code : not specified
Mondeo Phase 2 — 2.0 TDDi — 90 hp
Engine 2.0 TDDi — from 2003, end date unspecified
Engine code : not specified
Mondeo Phase 2 — 2.0 TDCi — 115 hp
Engine 2.0 TDCi — from 2003, end date unspecified
Engine code : not specified
Mondeo Phase 2 — 2.0 TDCi — 90 and 115 hp
Engine 2.0 TDCi — from 2005, end date unspecified
Engine code : not specified
Mondeo Phase 2 — 2.0 TDCi — 115 hp
Engine 2.0 TDCi — from 2005, end date unspecified
Engine code : not specified
Additional technical specifications
Product type: hybrid turbo
Engine options: 2.0 DI, , 2.0 TDCi and 2.0 TDDi
displacement : 2.0
Documented power ratings: 90 and 115 hp
Period covered: from 2000 onwards
Engine codes: not specified
Assembly instructions
⚠️ WARNING — IMPORTANT BEFORE ASSEMBLY
Before installation, identify and rectify the cause of the previous fault. Check the lubrication circuit, the supply and the return d’the oil and the cleanliness of all the pipes’.
Check the intake and ensure there are no foreign objects. Carry out the priming in accordance with the relevant guidelines and follow the manufacturer’s instructions.
If a lubrication fault is not rectified, it may lead to the turbocharger failing again.
How do you choose the right turbo ?
Check the part number engraved or marked on the turbocharger dthe original, then compare it with the OEM and manufacturer’s part numbers listed on this sheet. Also check the make, model, generation, engine type and power output in hp, theYear the mounting code and the engine code, where available. Having the same engine is not always enough to confirm compatibility.
⚠️ Check your turbo’s part numbers
Before placing your order, Compare the part number on your turbocharger d’origin’ using the references given in this fact sheet. Having the same motor does not always guarantee compatibility.
If you are in any doubt, please contact us with the full part number from your turbocharger.