This hybrid turbo plug & play is designed for engines Nissan 2.5 DI and TDI documented. Its designs combine a high-flow MFS compressor wheel, a 360° bearing stop and high-speed balancing.
The posts listed include, in particular, those relating to Nissan King Cab, Navara, Pick-Up and X-Trail. Compatibility must always be confirmed using the turbo’s part number d'origin'.
Available products — Stage 1, Stage 2 and Stage 3
Stage 1
Compressor wheel: High-capacity MFS
Bearing stop: 360°
Balancing: high speed at 150,000 rpm on a Cimat VSR test bench
This preparation acts on the compressor wheel in order to d'adjust the compression capacity and flow rate' d'air'. Its performance depends on the engine configuration and the turbocharging system.
Stage 2
Compressor wheel: High-capacity MFS oversized
Carter d'Admission:' reprofiled for to receive the new wheel oversized
Bearing stop: 360°
Balancing: high speed at 150,000 rpm on a Cimat VSR test bench
Reprofiling the casing allows d'fit the compressor wheel' oversized. This configuration may affect the flow rate d'air and the compressor’s behaviour, without, on its own, guaranteeing a specific engine power output'.
Stage 3
Compressor wheel: High-capacity MFS oversized
Carter d'Admission:' reprofiled for to receive the new wheel oversized
Bearing stop: 360°
Turbine wheel: high-speed oversized
Turbine casing: reprofiled for to receive the new wheel oversized
Balancing: high speed at 150,000 rpm on a Cimat VSR test bench
This procedure applies to the compressor and turbine sides. The oversized wheels and the reshaping of the casings adjust the airflow and gas flow capacities, but may also alter the response time and optimal operating conditions d'use'.
What is a hybrid turbo ?
A hybrid turbo retains a suitable turbocharger design for to receive modified internal components. Depending on the service, the work may involve the compressor wheel, the turbine wheel, the casings, the thrust bearing or balancing.
The aim is d'adjust the compression capacity and flow rate' d'air for a given engine setting'. A hybrid turbo is therefore not defined solely by the appearance of its compressor wheel, but by the consistency of its geometry and mechanical modifications.
MFS compressor wheel: standard or Performance ? ?
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This designation describes the manufacturing process and does not, in itself, guarantee an increase in flow rate d'air'.
A standard MFS wheel can retain a geometry equivalent to that d'origin'. An MFS wheel Performance may be designed with a geometry suited to the intended application, particularly in terms of the profile, height, width or diameter of the blades, where such modifications are envisaged.
A standard MFS wheel can be just as shiny as an MFS wheel Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more d'air'. The wheel described here is made of forged aluminium; it is lighter, larger and taller than the one d'original'; the product data indicates an additional 15 per cent compression.
Why does the geometry of the blades affect the flow rate? d'air?' ?
The compressor wheel draws in and then compresses the air fed to the engine. Its diameter, profile, height, width and the arrangement of the blades influence its aerodynamic behaviour and the amount d'air displaced under certain operating conditions'.
The result also depends on the casings, the turbine wheel, the boost pressure and the engine tuning. A larger wheel does not automatically guarantee better performance and may affect the turbocharger’s response time.
Reliability and balancing of the hybrid turbocharger
The 360° stop fitted to all three stages helps to distribute the axial forces to which the rotor is subjected. It does not exempt d'proper lubrication or compliance with the installation requirements'.
Every preparation benefits from d'high-speed balancing at 150,000 rpm on a Cimat VSR test bench'. The aim of this operation is to minimise vibrations and mechanical stresses on the rotor, without compensating for a fault d'installation or d'oil supply'.
Engine remapping and tuning
Appropriate engine management is required for make the most of the features d'a hybrid turbo'. The mapping, boost pressure and wastegate settings must be checked when remapping the ECU.
Depending on the level of preparedness, the systems d'injection, d'Exhaust and cooling systems may also need to be checked or adjusted'. The editing d'A hybrid turbo does not automatically guarantee a power boost without proper preparation'.
Turbo part numbers
OEM part numbers
14411VK500
VA420058
VB420058
14411-VK500
14411-UK500
14411-VK50A
14411-VK50B
14411UK500
14411VK50A
14411VK50B
VA420115
VD420058
Manufacturer reference
RHF4-VN3
Compatible vehicles and assignments
Nissan
King Cab 2.5 TDI — 133 hp
Engine 2.5 TDI — from 1998, end date unspecified
Engine code : not specified
Navara 2.5 DI — 130 and 133 hp
Engine 2.5 DI — from 2002, end date unspecified
Engine code : not specified
Pick-Up 2.5 DI — 133 hp
Engine 2.5 DI — from 2002, end date unspecified
Engine code : not specified
X-Trail 2.5 DI — 133 hp
Engine 2.5 DI — from 2002, end date unspecified
Engine code : not specified
Additional technical specifications
Product type: Hybrid Turbo
Configuration: Plug & play, Installation without modification
Documented engine specifications: 2.5 DI and 2.5 TDI
Documented power ratings: 130 and 133 hp depending on the role
Period covered: from 1998 onwards, depending on allocation
Assembly instructions
⚠️ WARNING — IMPORTANT BEFORE ASSEMBLY
Before installation, identify and rectify the cause of the previous fault. Check the lubrication circuit, the supply and the return d'the oil and the cleanliness of all the pipes'.
Check the intake and ensure there are no foreign objects present. Carry out the priming in accordance with the relevant guidelines and follow the vehicle manufacturer’s instructions.
If a lubrication fault is not rectified, it may lead to the turbocharger failing again.
How do you choose the right turbo ?
Check the part number marked on the turbocharger d'origin and compare it with the OEM and manufacturer part numbers listed on this sheet'. Also check the model, version, body style, engine type and power output in hp, theYear the mounting code and the engine code, where available.
The same engine can be fitted with several different turbo set-ups. The reference d'Origin' therefore remains the key element for confirm compatibility.
⚠️ Check your turbo’s part numbers
Before placing your order, Compare the part number on your turbocharger d'origin' using the references given in this fact sheet. Having the same motor does not always guarantee compatibility.
If in doubt, please contact us, quoting the reference number shown clearly on the plate dIdentifying your turbocharger.