This hybrid turbo for, designed for the 2.0 TD engine, features d mechanical modifications designed to adapt its compression capacity and d air flow.. It is designed plug & play to be fitted without altering the d original layout.
Depending on the package selected, the modification includes a high-flow MFS compressor impeller, a 360° thrust bearing, re-profiling of the casings or a turbine impeller oversized.
Available preparations — Stage 1, Stage 2 and Stage 3
Stage 1
High-flow MFS compressor impeller
360° thrust bearing
High-speed balancing at 150,000 rpm on a Cimat VSR test bench
This modification primarily affects the compressor section in order to d adapt the flow rate d to the air, whilst retaining the original mounting configuration without any alterations.
Stage 2
MFS high-flow compressor impeller oversized
d ’s intake housing has been re-profiled for accommodate the new impeller
360° thrust bearing
High-speed balancing at 150,000 rpm on a Cimat VSR test bench
The oversizing of the compressor impeller and the re-profiling of the housing enabl d to adapt the air passage d. The resulting performance also depends on the engine management system and peripheral equipment.
Stage 3
MFS high-flow compressor impeller oversized
d'intake housing, reprofiled for accommodate the new impeller
360° thrust bearing
High-flow turbine impeller oversized
Reworked turbine housing for to accommodate the new impeller
High-speed balancing at 150,000 rpm on a Cimat VSR test bench
This version is fitted to both the compressor and turbine sides of the.. Oversizing may affect both flow rate and response time; the choice of stage must therefore correspond to the engine’s overall configuration.
What is a hybrid turbocharger?
A hybrid turbo uses a turbocharger architecture adapted for to accommodate modified internal components. Depending on the stage, the modifications may involve the impellers, blade geometry, housings, thrust bearing or balancing.
The aim is d to adapt the compression capacity and air flow rate d. A hybrid turbo is not defined solely by the appearance of its compressor wheel: consistency between the components and their calibration remains essential.
MFS compressor wheel: standard or Performance?
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This manufacturing process alone does not guarantee a higher air flow rate. A standard MFS wheel may retain a geometry close to the original, whilst a Performance wheel can be given a profile or dimensions tailored to the tuning objective.
A standard MFS wheel can be just as shiny as an MFS wheel Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more d air. The wheel documented here is made of forged aluminium; it is lighter, larger and taller than the d original; the available data indicates an additional 15 per cent compression capacity.
Why does the geometry of the blades influence the air flow rate d?
The diameter, profile, height, width and arrangement of the blades influence air intake and compression.. A suitable geometry can move more d air under certain conditions, but the result also depends on the casings, the turbine, the boost pressure and the engine tuning. A larger impeller therefore does not automatically guarantee better performance and may alter the response time.
Reliability and balancing of the hybrid turbo
The 360° thrust bearing distributes axial forces over a wide surface area. The rotor is balanced at high speed, up to 150,000 rpm on a Cimat VSR test bench, in order to minimise vibrations and mechanical stresses. However, this balancing does not compensate for incorrect installation or inadequate lubrication.
Engine remapping and preparation
Appropriate engine management is required for to make the most of the hybrid turbo’s characteristics. Fuel injection, exhaust, cooling, boost pressure and, depending on the vehicle, the transmission must be checked or adjusted. The wastegate must be adjusted when reprogramming the ECU. No power gain is automatic without a coherent configuration.
Turbo part numbers
17201-64030
1720164030
Compatible vehicles and applications
No specific vehicle applications are documented. Compatibility must be confirmed based on the turbo part number d'original.
Additional technical specifications
Product type: Hybrid Turbo
Specified engine: 2.0 TD
Installation: Plug & play, no modifications required
Installation advice
⚠️ WARNING — IMPORTANT BEFORE INSTALLATION
Identify and rectify the cause of the previous fault. Check the lubrication circuit, the oil supply and return lines d, and ensure the pipes are clean. Check the intake for any foreign objects, then prime the system in accordance with the applicable recommendations. Follow the manufacturer’s instructions. A lubrication fault that is not rectified may result in the turbocharger failing again.
How do you identify the correct turbo?
Check the turbo’s part number d – the original, OEM or manufacturer’s part numbers, the make, model, generation, body style, engine type, power output hp, years of manufacture and the engine code.. An identical engine type does not always guarantee compatibility.
⚠️ Check your turbo’s part numbers
Before ordering, compare the part number marked on your original turbo d with the part numbers listed in this specification sheet. An identical engine specification does not always guarantee compatibility.
If in doubt, please contact us with the part number found on your turbocharger.