This hybrid turbocharger is designed for the Range Rover TD6 2.9 TDI, with a power output of 177 hp, from 2002 onwards.. The upgrade combines a high-flow MFS compressor wheel, a 360° bearing stop and high-speed balancing.
Three levels of modification are documented at.. The modifications become progressively more extensive and may involve the intake casing d, the turbine wheel and the turbine casing.
Available tuning packages — Stage 1, Stage 2 and Stage 3
Stage 1
Compressor impeller: MFS high-flow
Bearing: 360° thrust
Balancing: high-speed at 150,000 rpm on a Cimat VSR test bench
This modification is carried out on the compressor impeller in order dto adjust the compression capacity and the air flow rate d. The result also depends on the motor settings and associated peripherals.
Stage 2
Compressor impeller: MFS high-flow oversized
d’ intake housing: re-profiled for accommodate the new impeller oversized
Bearing: 360° thrust
Balancing: high-speed at 150,000 rpm on a Cimat VSR test bench
The housing has been re-profiled to allow dto fit the compressor wheel oversized. This configuration aims to optimise air flow and compression, without necessarily da specific increase in power.
Stage 3
Compressor impeller: MFS high-flow oversized
d’ intake housing: re-profiled for to accommodate the new impeller oversized
Bearing: 360° thrust
Turbine impeller: high-flow oversized
Turbine casing: re-profiled for ly to accommodate the new impeller oversized
Balancing: high-speed at 150,000 rpm on a Cimat VSR test bench
This stage involves modifications to the compressor and turbine sides. A larger impeller can alter the flow rate, response time and optimal operating range of the turbocharger.
What is a hybrid turbo?
A hybrid turbo is based on a turbocharger architecture adapted for to accommodate internal components that differ from the original dconfiguration. Depending on the stage, modifications may involve the compressor impeller, casings, turbine impeller, thrust bearing and balancing.
The aim is d’to adjust the compression capacity and the air flow rate d’. However, a hybrid turbo is not defined solely by the appearance of its impeller: the geometry of the components, their combination and the engine settings are crucial.
MFS compressor wheel: standard or Performance?
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This manufacturing process alone does not guarantee an increase in airflow d. A standard MFS wheel may retain a geometry equivalent to that dof the original.
An MFS impeller Performance can be given a geometry tailored to the tuning objective. For this product, a high-flow MFS impeller is documented, with a version oversized for for Stages 2 and 3.
A standard MFS impeller can be just as effective as an MFS impeller Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more d’air. A higher flow rate can contribute to power output when the engine tuning is correctly adapted.
Why does the geometry of the blades influence the air flow rate d?
The compressor impeller draws in and then compresses the air sent to the engine. Its diameter, profile, height, width and blade arrangement influence its aerodynamic behaviour and the amount dof air displaced under certain conditions.
The result also depends on the housings, the turbine wheel, the boost pressure and the engine management system. A larger wheel therefore does not automatically guarantee better performance and may affect response time.
Reliability and balancing of the hybrid turbo
The 360° thrust bearing, documented across the three stages, helps to distribute axial forces around the turbocharger’s axis. It does not, however, replace d’proper lubrication or d’correct installation.
The assembly is balanced at high speed, at 150,000 rpm on a Cimat VSR test bench. This operation aims to limit vibrations and mechanical stresses on the rotor, but does not protect against d’installation faults, contamination or insufficient oil supply.
Engine reprogramming and preparation
The engine management system must be adapted for to make full use of the hybrid turbo’s characteristics. The wastegate must be adjusted during the ECU reprogramming.
Depending on the level of tuning, the fuel injection, exhaust system, cooling, boost pressure and transmission must be checked or adjusted. Fitting this turbo does not automatically guarantee a power gain without a coherent configuration of the engine and its peripheral components.
Turbo part numbers
OEM part numbers
11657785838
11657785839
11657785839G04
11657785840
11657785840G04
7785839G04
7785840G04
PMF000050
PMF000060
LR006110
LR006705
Manufacturer’s part numbers
712541-0001
712541-0002
712541-0003
712541-0005
712541-0006
712541-1
712541-2
712541-3
712541-5
712541-5002S
712541-6
Compatible vehicles and applications
Land Rover
Range Rover TD6 — 177 hp
2.9 TDI — from 2002, end date unspecified
Engine code: not specified
Additional technical specifications
Product type: turbo hybrid
Engine: TD6 2,.,9 TDI
displacement: 2.9 l
Power: 177 hp
Production period: from 2002
Engine code: not specified
Fitting instructions
⚠️ WARNING — IMPORTANT BEFORE INSTALLATION
Identify and rectify the cause of the previous fault. Check the lubrication circuit, including the oil supply and return d, then check that all pipes are clean.
Check the inlet and ensure that no foreign objects can reach the compressor. Carry out priming in accordance with the applicable recommendations and follow the vehicle manufacturer’s instructions.
A lubrication fault that is not rectified may lead to further damage to the turbocharger.
How do you identify the correct turbo?
Check the part number marked on the original turbo dand compare it with the OEM and manufacturer part numbers in this data sheet. Also check the make, model, TD6 version 2.9 TDI, power output 177 hp and theYear.
An identical engine specification does not always guarantee compatibility: there may be several different set-ups depending on the generation, the vehicle’s configuration or the production period.
⚠️ Check your turbo’s part numbers
Before ordering, compare the part number marked on your original turbo d with the part numbers listed in this data sheet. An identical engine does not always guarantee compatibility.
If in doubt, please contact us with the full part number taken from your turbocharger.