This hybrid turbo for engines Bmw 2.0 150 and 163 diesel hp is available in three levels of preparation. Each version is fitted with an MFS compressor wheel Performance, a 360° bearing stop and high-speed balancing at 150,000 rpm on a Cimat VSR test bench.
The documented assignments relate to Bmw 5 Series E60, 5 Series Touring E61 and X3 E83. The installation is planned to take place without any modifications d'turbo tuning, but the engine settings and preparation must be appropriate for the chosen course'.
Available products — Stage 1, Stage 2 and Stage 2+
Stage 1
Compressor wheel: MFS Performance high-speed
Dimensions: 38.58 / 52.00 mm
Blade configuration: 6+6
Stop: 360° bearing
Balancing: 150,000 rpm on a Cimat VSR test bench
This assembly uses an MFS wheel Performance whose geometry is designed for adjust the flow rate d'compressor air, whilst maintaining the documented dimensions' for this work placement.
Stage 2
Compressor wheel: MFS Performance high-speed oversized
Dimensions: 41.58 / 56.03 mm
Blade configuration: 7+7
Carter d'Admission:' re-profiled for to receive the wheel oversized
Stop: 360° bearing
Balancing: 150,000 rpm on a Cimat VSR test bench
The wheel oversized requires the casing to be re-profiled d'admission'. This combination aims to alter the compression capacity and flow rate d'air, with behaviour that depends on the engine’s overall configuration'.
Stage 2+
Compressor wheel: MFS Performance high-speed oversized
Dimensions: 47.00 / 60.00 mm
Blade configuration: 8+0
Carter d'Admission:' re-profiled for to receive the wheel oversized
Stop: 360° bearing
Balancing: 150,000 rpm on a Cimat VSR test bench
This version uses the largest compressor wheel of all the documented set-ups. Its design and 8+0 configuration may affect flow rate and response time; its operation requires appropriate tuning.
What is a hybrid turbo ?
A hybrid turbocharger is based on a turbocharger design that has been adapted to accommodate internal components or machining processes that differ from the standard configuration d'origin'. Depending on the course, the modifications documented here relate to the compressor wheel, its geometry, its dimensions and the re-profiling of the casing d'admission'.
The aim is d'adjust the compression capacity and flow rate' d'air'. However, a hybrid turbo is not defined solely by the appearance of its impeller: the balance between the compressor, the turbine, the housings, the lubrication system and the engine management system remains crucial.
MFS compressor wheel: standard or Performance ? ?
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This manufacturing process does not, on its own, guarantee an increase in throughput d'air'. A standard MFS wheel can retain a geometry equivalent to that d'origin'.
A standard MFS wheel can be just as shiny as an MFS wheel Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more d'air'. A wheel Performance may feature a specific diameter, profile or blade configuration, as in the three examples shown here. A higher flow rate can help to generate more power only if the engine has been properly tuned.
Why does the geometry of the blades affect the flow rate? d'air?' ?
The compressor wheel draws in and then compresses the intake air. Its diameter, profile, height, width and the arrangement of the blades all influence its aerodynamic behaviour. The right geometry can move more d'air under certain conditions, but the result also depends on the casings, the turbine, the boost pressure and the engine tuning'. A larger wheel therefore does not automatically guarantee a better result and may affect the response time.
Reliability and balancing of the hybrid turbocharger
The 360° stop, as documented in each training course, distributes axial forces across the entire surface. The rotor is balanced at high speed – 150,000 rpm – on a Cimat VSR test bench, in order to minimise vibrations and mechanical stresses. However, these procedures do not compensate for incorrect installation or a lack of lubrication.
Engine remapping and tuning
The engine management system needs to be adjusted for make the most of the hybrid turbo’s features. Mapping, boost pressure, fuel injection, exhaust, air cooling d'The intake system, as well as the clutch or gearbox, may need to be checked or adjusted depending on the vehicle'. The wastegate must be adjusted during the installation and tuning of the ECU.
Turbo part numbers
Manufacturer’s part numbers
762965-0001
762965-0002
762965-0003
762965-0007
762965-0008
762965-0009
762965-0016
762965-0017
762965-0020
762965-1
762965-16
762965-17
762965-2
762965-20
762965-3
762965-5001S
762965-5002S
762965-5003S
762965-5007S
762965-5008
762965-5008S
762965-5009S
762965-5016S
762965-5017
762965-5017S
762965-5020
762965-5020S
762965-7
762965-8
762965-9
762965-9020S
763091-0001
763091-0004
763091-4
763091-5004S
OEM part numbers
7794020
7794020G
7794020H
7794021
7794021G
7794021H
7794022
7794022G
7794022H
11652287495
11657794020
11657794020G
11657794020H
11657794021
11657794021G
11657794021H
11657794022
11657794022G
11657794022H
Compatible vehicles and assignments
Bmw
5 Series (E60) — 150 hp
Diesel 2.0 — September 2005 to February 2007
Engine code : M47 D20 (204D4)
5 Series (E60) — 163 hp
Diesel 2.0 — September 2005 to December 2009
Engine codes: M47 D20 (204D4), N47 D20 A, N4
5 Series Touring (E61) — 150 hp
Diesel 2.0 — September 2005 to February 2007
Engine code : M47 D20 (204D4)
5 Series Touring (E61) — 163 hp
Diesel 2.0 — April 2005 to May 2010
Engine codes: M47 D20 (204D4), N47 D20 A, N4
X3 (E83) — 150 hp
Diesel 2.0 — September 2004 to August 2007
Engine code : M47 D20 (204D4)
Additional technical specifications
Product type: hybrid turbo
Engine: Bmw 2.0 diesel
Documented power ratings: 150 and 163 hp
Engine codes: M47 D20 (204D4), N47 D20 A, N4
Editing: Installation without modification d'Turbo tuning'
Assembly instructions
⚠️ WARNING — IMPORTANT BEFORE ASSEMBLY
Identify and rectify the cause of the previous fault. Check the lubrication circuit, the supply and the return d'oil', then check that all the ducts are clean.
Check the intake and ensure there are no foreign objects present. Carry out the priming in accordance with the relevant guidelines and follow the manufacturer’s instructions.
The wastegate and engine management system must be adjusted to suit the modifications. If a lubrication fault is not rectified, it may lead to the turbocharger failing again.
How do you choose the right turbo ?
Check the turbo part number d'Origin, OEM and manufacturer part numbers, as well as the vehicle’s model, generation, body style, power output, production period and engine code'. Having the same motor does not always guarantee compatibility.
⚠️ Check your turbo’s part numbers
Before placing your order, Compare the part number on your turbocharger d'origin' using the references given in this fact sheet. Having the same motor does not always guarantee compatibility.
If you’re unsure, please contact us with the reference number shown on your turbo d'Vehicle origin and details'.