This hybrid turbocharger is designed for the following petrol engines Smart 0.7i with 75 and 82 hp as specified in the application list.. The kit includes an MFS compressor wheel Performance, a 360° bearing retainer and high-speed balancing.
Documented applications include the Smart Fortwo 450 and Roadster 452. Two levels of preparation are available to d adapt the turbocharger’s characteristics to the engine project.
Available configurations — Stage 1 and Stage 2
Stage 1
Compressor wheel: MFS Performance high-flow
Dimensions: 26.85/38.00 mm
Blade configuration: 6+6
Bearing: 360° thrust
Balancing: high-speed at 150,000 rpm on a Cimat VSR test bench
This modification adapts the compressor wheel to alter its air displacement capacity d. The result depends on the engine configuration, boost pressure and the chosen electronic control system.
Stage 2
Compressor wheel: MFS Performance, high flow rate
Documented dimensions: 26.85/38.00 mm and 29.40/42.00 mm
Blade configuration: 6+6
d intake housing: re-profiled for commodate the impeller oversized
Bearing: 360° thrust
Balancing: high-speed at 150,000 rpm on a Cimat VSR test bench
The Stage 2 combines a oversized impeller with a reprofiled housing d'admission. This modification is designed to adapt the airflow to the new geometry, though it does not, on its own, guarantee identical final power output or performance across every configuration.
What is a hybrid turbo?
A hybrid turbo retains a turbocharger architecture designed for to accommodate modified internal components. Depending on the modification, these changes may involve the compressor wheel, its dimensions, the geometry of the blades, the housings, the thrust bearing system or the balancing.
The aim is d to adapt the compression capacity and air flow rate d. However, a hybrid turbo is not defined solely by the appearance of its impeller: consistency between the components and the engine tuning remains essential.
MFS compressor wheel: standard or Performance?
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This manufacturing process alone does not guarantee an increase in air flow rate d. A standard MFS wheel may retain a geometry equivalent to that d of the original.
A standard MFS impeller can be just as shiny as an MFS impeller Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more d'air. A Performance geometry may utilise a profile, dimensions or blade configuration suited to the tuning objective. A higher airflow rate can contribute to an increase in power when the engine configuration is correctly matched.
Why does blade geometry influence air flow rate d?
The compressor impeller draws in and then compresses the air sent to the engine. Its diameter, profile, height, width and blade arrangement influence its aerodynamic behaviour. A suitable geometry can move more d air under certain conditions, but the result also depends on the housing, the turbine wheel, the boost pressure and the engine tuning. A larger wheel therefore does not automatically guarantee better performance and may alter the response time.
Reliability and balancing of the hybrid turbo
The documented 360° thrust bearing helps to distribute axial forces around the bearing. The rotor is balanced at high speed, up to 150,000 rpm on a Cimat VSR test bench, in order to minimise vibrations and mechanical stresses. However, this balancing does not compensate for incorrect installation or inadequate lubrication.
Engine remapping and preparation
Adjustments to the mapping and boost pressure management may be necessary for to make the most of the hybrid turbo’s characteristics. The fuel injection, exhaust, air cooling d, intake, clutch or gearbox must also be checked depending on the project.. The wastegate must be adjusted during installation and when remapping the ECU.. No power gain is automatic without proper preparation.
Turbo specifications
OEM part numbers
1600961099
160096109980
A1600961099
A160096109980
C0010550V001
C0010550V001000000
Q0010550V001
Q0010550V001000000
0010550V001000000
0012473V001000000
Manufacturer’s part numbers
727238-0001
727238-1
727238-5001S
Compatible vehicles and specifications
Smart
Fortwo Cabrio (450) — 75 hp
0.7i petrol — 01/2004 to 01/2007
Engine code : M 160.920
Fortwo Coupé (450) — 75 hp
0.7i petrol — Jan 2004 to Jan 2007
Engine code : M 160.920
Roadster (452) — 82 hp
0.7i petrol — 04/2003 to 11/2005
Engine code : M 160.922
Roadster Coupé (452) — 82, hp
0.7i petrol — 04/2003 to 11/2005
Engine code : M 160.921
Additional technical specifications
Product type: turbo hybrid
Engine: 0.7i petrol
Power outputs: 75 hp and 82 hp
Engine codes: M 160.920, M 160.921, M 160.922
Documented periods: April 2003 to January 2007, depending on the application
Installation: plug & play, without any modifications to the assembly
Assembly instructions
⚠️ CAUTION — IMPORTANT BEFORE INSTALLATION
Identify and rectify the cause of the previous fault. Check the lubrication circuit, the oil supply and return d, as well as the cleanliness of the oil lines. Check the intake for any foreign objects, then prime the system in accordance with the applicable recommendations. Follow the manufacturer’s instructions and have the wastegate adjusted via the engine management system. A lubrication fault that is not rectified may lead to the turbocharger failing again.
How do you identify the correct turbo?
Check the part number marked on the turbo d the original, OEM and manufacturer part numbers, as well as the make, model, generation, body style, engine type, power output, production period and engine code. An identical engine type does not always guarantee compatibility.
⚠️ Check your turbo’s part numbers
Before ordering, compare the part number marked on your original turbo d with the part numbers listed in this product sheet. An identical engine specification does not always guarantee compatibility.
If in doubt, contact our team with the full part number taken from your turbocharger.