This hybrid turbo for engine options Mercedes 2.2 CDi offers three distinct levels of preparation. Each version is fitted with an MFS compressor wheel Performance high flow rate, a 360° bearing stop and high-speed balancing on a Cimat VSR test bench.
The documented assignments relate in particular to Mercedes- Mercedes-Benz Sprinter B906, Viano W639 and Vito W639 in 109, 116 or 150 hp. The benchmark for turbochargers d'The origin must be verified before any order is placed'.
Available products — Stage 1, Stage 2 and Stage 2+
Stage 1
Compressor wheel: MFS Performance high-speed
Dimensions: 37.50 / 52.50 mm
Blade configuration: 6+6
Level: 360° stop
Balancing: 150,000 rpm on a Cimat VSR test bench
This kit includes an MFS wheel Performance from 37.50 / 52.50 mm with a 6+6 configuration. It aims to adjust the compression capacity and flow rate d'air, subject to' d'a properly tuned engine management system'.
Stage 2
Compressor wheel: MFS Performance high-speed oversized
Dimensions: 40.61 / 56.02 mm
Blade configuration: 9+0
Carter d'Admission:' reprofiled for to receive the wheel oversized
Level: 360° stop
Balancing: 150,000 rpm on a Cimat VSR test bench
The Stage The 2 gets a larger wheel with a 9+0 configuration. Reprofiling the casing d'admission allows' d'to accommodate this specific geometry, the behaviour of which also depends on the mapping and the engine components'.
Stage 2+
Compressor wheel: MFS Performance high-speed oversized
Dimensions: 47.00 / 60.50 mm
Blade configuration: 6+6
Carter d'Admission:' reprofiled for to receive the wheel oversized
Level: 360° stop
Balancing: 150,000 rpm on a Cimat VSR test bench
This version uses a 47.00 / 60.50 mm wheel in a 6+6 configuration and a casing d're-profiled intake'. Increasing the dimensions may affect the available flow rate, response time and range d'Optimal use of the turbocharger'.
What is a hybrid turbo ?
A hybrid turbo is based on a specially adapted turbocharger design for to receive internal components that differ from the configuration d'origin'. Depending on the course, the preparation may cover the compressor wheel, its geometry, its dimensions, the housing and the thrust bearing system.
The aim is d'adjust the compression capacity and flow rate' d'air'. A hybrid turbo is not defined solely by the appearance of its impeller: the dimensions, the blade profile, the machining, the balancing and the overall consistency are all crucial factors.
MFS compressor wheel: standard or Performance ? ?
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This manufacturing process does not, on its own, guarantee an increase in throughput d'air'. A standard MFS wheel can retain a geometry equivalent to that d'origin'.
A standard MFS wheel can be just as shiny as an MFS wheel Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more d'air'. Depending on its design, a wheel Performance may use a blade diameter, profile or arrangement suited to the preparation objective. A higher flow rate can help to generate more power with the appropriate engine tuning, although this does not in itself guarantee a performance gain.
Why does the geometry of the blades affect the flow rate? d'air?' ?
The compressor wheel draws in and then compresses the air fed to the engine. Its diameter, profile, height, width and the arrangement of the blades all influence its aerodynamic behaviour. The result also depends on the compressor housing, the turbine section, the boost pressure and the engine calibration. A larger wheel therefore does not automatically guarantee a better result and may affect the response time.
Reliability and balancing of the hybrid turbocharger
The 360° stop, as documented in the three training courses, distributes the axial forces around the bearing. Each formulation is balanced at high speed – up to 150,000 rpm on a Cimat VSR test bench – in order to minimise vibrations and mechanical stress on the rotor. However, this balancing does not compensate for incorrect installation or a lack of lubrication.
Engine remapping and tuning
The engine management system needs to be adjusted for make the most of the characteristics of the chosen preparation. Mapping, boost pressure, fuel injection, exhaust, air cooling d'Intake and transmission must be monitored in accordance with the level of preparedness'. The wastegate must be adjusted during the installation and remapping of the ECU. No increase in power can be attributed to the turbo alone.
Turbo part numbers
Manufacturer’s part numbers
VV14
VF40A132
V40A01033
V40A0132
OEM part numbers Mercedes-Benz
6460960199
6460960699
646096069980
A6460960199
A6460960699
A646096069980
Compatible vehicles and assignments
Mercedes-Benz
Sprinter 5-t Platform/Chassis (B906) — LCV — 150 hp
Diesel — June 2006 to December 2009
Engine codes: OM 646.986, OM 646.989, OM 646
Sprinter 5-t Van (B906) — Light Commercial Vehicle — 150 hp
Diesel — June 2006 to December 2009
Engine codes: OM 646.986, OM 646.989, OM 646
Viano (W639) — LCV — 109 hp
Diesel — September 2003 to an unspecified date
Engine code : OM 646.982
Viano (W639) — LCV — 109 hp
Diesel — July 2005 to an unspecified date
Engine code : OM 646.982
Viano (W639) — LCV — 116 hp
Diesel — August 2005 to an unspecified date
Engine code : OM 646.982
Viano (W639) — LCV — 150 hp
Diesel — September 2003 to an unspecified date
Engine codes: OM 646.980, OM 646.982
Viano (W639) — LCV — 150 hp
Diesel — July 2005 to an unspecified date
Engine code : OM 646.982
Vito / Mixto Van (W639) — Light Commercial Vehicle — 109 hp
Diesel — September 2003 to an unspecified date
Engine code : OM 646.982
Vito / Mixto Van (W639) — Light Commercial Vehicle — 109 hp
Diesel — September 2007 to an unspecified date
Engine code : OM 646.982
Vito / Mixto Van (W639) — Light Commercial Vehicle — 116 hp
Diesel — September 2007 to an unspecified date
Engine codes: OM 646.980, OM 646.982
Vito / Mixto Van (W639) — Light Commercial Vehicle — 150 hp
Diesel — September 2003 to an unspecified date
Engine codes: OM 646.980, OM 646.982
Vito / Mixto Van (W639) — Light Commercial Vehicle — 150 hp
Diesel — July 2006 to an unspecified date
Engine code : OM 646.982
Vito Bus (W639) — LCV — 109 hp
Diesel — September 2003 to an unspecified date
Engine code : OM 646.982
Vito Bus (W639) — LCV — 109 hp
Diesel — September 2007 to August 2014
Engine code : OM 646.982
Vito Bus (W639) — LCV — 116 hp
Diesel — September 2007 to an unspecified date
Engine code : OM 646.980
Vito Bus (W639) — LCV — 150 hp
Diesel — September 2003 to an unspecified date
Engine codes: OM 646.980, OM 646.982
Vito Bus (W639) — LCV — 150 hp
Diesel — September 2007 to August 2014
Engine code : OM 646.982
Additional technical specifications
Product type: hybrid turbo
Engine: Mercedes 2.2 CDi
Fuel: diesel
Documented power ratings: 109, 116 and 150 hp
Engine codes: OM 646, OM 646.980, OM 646.982, OM 646.986, OM 646.989
Editing: with no documented external changes
Assembly instructions
⚠️ WARNING — IMPORTANT BEFORE ASSEMBLY
Before installation, it is essential to investigate and rectify the cause of the previous fault. Check the lubrication circuit, the supply and the return d'the oil and the cleanliness of all the pipes'.
Check the intake and ensure there are no foreign objects present. Carry out the priming in accordance with the relevant guidelines and follow the manufacturer’s instructions. The wastegate settings and engine management must be adapted to the stage fitted.
If a lubrication fault is not rectified, it may lead to the turbocharger failing again.
How do you choose the right turbo ?
Check the part number marked on the turbocharger d'origin', then compare the OEM and manufacturer part numbers. Also check the model, generation, body style, engine type and power output in hp, the assembly period and the engine code. Having the same engine is not always enough to confirm compatibility.
⚠️ Check your turbo’s part numbers
Before placing your order, Compare the part number on your turbocharger d'origin' using the references given in this fact sheet. Having the same motor does not always guarantee compatibility. If you’re unsure, please contact us with the reference number shown on your turbo.