This hybrid turbo for for 2.0 TD /DI engines with 90, 101 and 110 hp is designed as a performance solution with Installation without modification external. Depending on the selected upgrade package, the modification may include the high-flow MFS compressor wheel, the housings and the turbine wheel.
Each configuration is fitted with a 360° bearing stop and undergoes high-speed balancing at 150,000 rpm on a Cimat VSR test bench. The engine management system and peripheral equipment must be adapted to the chosen tuning level.
Available preparation options — Stage 1, Stage 2 and Stage 3
Stage 1
Compressor wheel: MFS high-flow
Thrust bearing: 360° bearing
Balancing: 150,000 rpm on a Cimat VSR test bench
This modification primarily affects the compressor section in order d to adjust the compression capacity and d the air flow rate, whilst retaining the mechanical configuration documented for this stage.
Stage 2
Compressor impeller: MFS high-flow oversized
d ’ intake housing: Reprofiled for accommodate the new impeller
Thrust bearing: 360° bearing
Balancing: 150,000 rpm on a Cimat VSR test bench
oversized ’s compressor impeller requires the intake housing to be re-profiled d. This modification aims to increase air flow capacity d, with performance depending on the mapping and the overall engine configuration.
Stage 3
Compressor wheel: MFS high-flow oversized
Intake housing d: Reprofiled for to accommodate the new impeller
Thrust bearing: 360° bearing
Turbine impeller: High-flow oversized
Turbine housing: Reprofiled for ly to accommodate the new impeller
Balancing: 150,000 rpm on a Cimat VSR test bench
This configuration alters the compressor and turbine sides. Larger dimensions may affect air flow rate d and response time; its operation requires appropriate engine preparation.
What is a hybrid turbocharger?
A hybrid turbo utilises a turbocharger architecture adapted for accommodate internal components that differ from the original configuration d. Depending on the stage, modifications may involve the compressor wheel, the housings, the turbine wheel, the thrust bearing and the balancing.
The aim is d to adapt the compression capacity and the d air flow. However, a hybrid turbo is not defined solely by the appearance of its impeller: the geometry of the components and the overall coherence of the assembly are crucial.
MFS compressor wheel: standard or Performance?
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This manufacturing process alone does not guarantee an increase in air flow rate. A standard MFS wheel may retain a geometry equivalent to that of the d original.
The high-flow MFS impeller documented at for for this turbo is described as a forged aluminium impeller, which is lighter, larger and taller than the original, with a claimed 15 per cent higher compression capacity. A standard MFS impeller can be just as effective as an MFS impeller Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more d air.
Why does the geometry of the blades influence the airflow d?
The compressor impeller draws in and then compresses the air. Its diameter, profile, height, width and blade arrangement all influence its aerodynamic behaviour. The result also depends on the casings, the turbine, the boost pressure and the engine tuning. A larger impeller therefore does not automatically guarantee better performance and may alter the response time.
Reliability and balancing of the hybrid turbocharger
The 360° thrust bearing distributes axial forces over a suitable surface. The rotor is balanced at high speed, up to 150,000 rpm on a Cimat VSR test bench, in order to minimise vibrations and mechanical stresses. This balancing does not replace correct installation or proper lubrication.
Engine remapping and preparation
Appropriate engine mapping is required for to make the most of the turbo’s characteristics. Boost pressure management and wastegate adjustment must be carried out during remapping. Depending on the level of tuning, the fuel injection, exhaust system, cooling system, intake and transmission may also need to be checked or adjusted. The turbo alone does not guarantee a power gain.
Turbo specifications
OEM part numbers
RF2B13700A
RF2B24018D
Manufacturer part numbers
RHF3VJ27
VA410047
VJ27
Compatible vehicles and applications
Fits to be confirmed
No specific make, model, production period or engine code is documented. Compatibility must be checked against the original turbo part numbers d.
Additional technical specifications
Product type: Hybrid Turbo
Engine: 2.0 TD /DI
Specified power outputs: 90, 101 and 110 hp
Installation: Plug & play, with no external modifications required
Installation advice
⚠️ WARNING — IMPORTANT BEFORE INSTALLATION
Identify and rectify the cause of the previous fault. Check the lubrication circuit, the oil supply and return d, as well as the cleanliness of the oil lines. Check the inlet for any foreign objects, then prime the system in accordance with the applicable recommendations. Follow the manufacturer’s instructions. A lubrication fault that is not rectified may lead to further turbocharger failure.
How do you identify the correct turbo?
Check the turbo part number d, the original OEM and manufacturer part numbers, as well as the make, model, generation, body style, engine type, power output,Year and engine code.. An identical engine type does not always guarantee compatibility.
⚠️ Check your turbo’s part numbers
Before ordering, compare the part number marked on your original turbo d with the part numbers listed in this specification sheet. An identical engine specification does not always guarantee compatibility. If in doubt, please contact us before placing your order.