This hybrid turbo for, designed for the 2.0 CRDi 136 hp engine, features d an internal modification designed to adapt its compression capacity and air flow d. Depending on the upgrade package chosen, it is fitted with a high-flow MFS compressor wheel, a 360° stop ring and additional modifications to the casings or the turbine section.
The mechanical fitment is of the ‘ plug & play ’ type, requiring no modification to the original d. system. Documented applications include certain Hyundai Tucson and Kia Sportage models fitted with the 2.0 CRDi 136 engine hp.
Available specifications — Stage 1, Stage 2 and Stage 3
Stage 1
Compressor wheel: MFS high-flow
Thrust bearing: 360°
Balancing: high-speed at 150,000 rpm on a Cimat VSR test bench
This modification acts on the compressor impeller to d adapt the flow rate d to the air, whilst maintaining a mechanical configuration designed for for direct mounting.
Stage 2
Compressor impeller: MFS high-flow oversized
Intake casing d: re-profiled for accommodate the new impeller oversized
Thrust bearing: 360° bearing
Balancing: high-speed at 150,000 rpm on a Cimat VSR test bench
The Stage 2 combines a oversized compressor impeller with a d intake housing, re-profiled. This combination is designed to adapt the airflow and compression to the new geometry.
Stage 3
Compressor impeller: MFS high-flow oversized
Housing d: re-profiledintake for to accommodate the new impeller oversized
Thrust bearing: 360°
Turbine impeller: high-flow oversized
Turbine casing: re-profiled for ly to accommodate the new impeller oversized
Balancing: high-speed at 150,000 rpm on a Cimat VSR test bench
The Stage 3 modifies the compressor and turbine sections. The final performance depends on the overall set-up, in particular the engine management system, boost pressure and the vehicle’s peripherals.
What is a hybrid turbo?
A hybrid turbo is based on a turbocharger architecture adapted for to accommodate internal components that differ from the original configuration d. Depending on the tuning stage, the modifications may involve the compressor wheel, the housings, the turbine wheel, the thrust bearing or the rotor balancing.
The aim is d to adapt the compression capacity and the air flow rate d. However, a hybrid turbo is not defined solely by the appearance of its impeller: the geometry of the components and how they are combined are decisive.
MFS compressor wheel: standard or Performance?
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This manufacturing process alone does not guarantee an increase in air flow rate d. A standard MFS wheel may retain a geometry equivalent to the d original.
An MFS wheel Performance can be designed with a geometry suited to the intended application, featuring a specific profile or dimensions where such modifications are required. A standard MFS wheel can be just as shiny as an MFS wheel Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more d air. Achieving d a higher flow rate requires appropriate engine tuning.
Why does the geometry of the blades influence the air flow rate d?
The compressor impeller draws in and then compresses the air intended for the engine. Its diameter, profile, height, width and the arrangement of its blades influence its aerodynamic behaviour. A suitable geometry can move more d air under certain conditions, but the result also depends on the casings, the turbine, the boost pressure and the mapping. A larger impeller therefore does not automatically guarantee a better result and may alter the response time.
Reliability and balancing of the hybrid turbocharger
The documented 360° stop helps to distribute axial forces. The rotor is balanced at high speed, up to 150,000 rpm on a Cimat VSR test bench, in order to minimise vibrations and mechanical stresses. This balancing does not protect against a lack of lubrication, contamination of the system or incorrect installation.
Engine remapping and preparation
The engine management system must be adapted for to make full use of the hybrid turbo’s characteristics. The mapping, boost pressure, fuel injection, exhaust and cooling systems must be checked or adjusted according to the level of tuning. The wastegate must be adjusted when remapping the ECU. The clutch, the gearbox and other components must also be checked depending on the vehicle and its intended use.
Turbo specifications
Manufacturer’s part numbers
54399880107
54399700107
5439-970-0107
OEM part numbers
28231-2F300
282312F300
28230-2F300
282302F300
Compatible vehicles and applications
Hyundai
Tucson (JM) — 2.0 CRDi 136 hp
Diesel — 2006 to 2010
Engine code : not specified
Tucson (LM) — 2.0 CRDi 136 hp
Diesel — 2010
Engine code : not specified
Kia
Sportage (SL) — 2.0 CRDi 136 hp
Diesel — 2010
Engine code : not specified
Additional technical specifications
Product type: turbo hybrid
Engine: 2.0 CRDi
displacement: 2.0 l
Fuel: diesel
Power: 136 hp
Documented period: 2006–2010 depending on application
Installation: plug & play, without any modifications to the original d ’s system
Installation advice
⚠️ WARNING — IMPORTANT BEFORE INSTALLATION
Identify and rectify the cause of the previous fault. Check the lubrication circuit, as well as the oil supply and return d.
Check that the pipes and the inlet are clean and free from foreign matter. Carry out priming in accordance with the applicable recommendations and follow the manufacturer’s instructions.
A lubrication fault that is not rectified may lead to further turbocharger failure.
How do you identify the correct turbo?
Check the part number marked on the turbo d the original, OEM and manufacturer part numbers, as well as the make, model, generation, engine type, power output, mountingYear and engine code. An identical engine may be fitted with several different turbo configurations.
⚠️ Check your turbo’s part numbers
Before ordering, compare the part number marked on your original turbo d with the part numbers listed in this specification sheet. An identical engine does not always guarantee compatibility.
If in doubt, please contact us with the full part number taken from your turbocharger.