This hybrid turbo has been tuned for engines 1.9 dCi, , DI-D, DTI, DI, , TDCI and TDI listed in the posts below. It incorporates an MFS compressor wheel Performance high-throughput, a 360° bearing stop and high-speed balancing on a Cimat VSR bench.
Three levels of preparedness are documented. When choosing a course, consideration must be given to the vehicle, its intended use and any modifications made to the engine management system and peripheral systems.
Available products — Stage 1, Stage 2 and Stage 2+
Stage 1
Compressor wheel: MFS Performance high-speed
Dimensions: 37.91 / 49.00 mm
Blade configuration: 6+6
Bearing stop: 360°
Balancing: 150,000 rpm on a Cimat VSR test bench
This setup uses an MFS wheel Performance whose geometry is designed to adjust the flow rate d'compressor air'. Its final behaviour depends on the engine’s configuration and its electronic control system.
Stage 2
Compressor wheel: MFS Performance high-speed oversized
Dimensions: 38.50 / 52.19 mm
Blade configuration: 11+0
Carter d'Admission:' Reprofiled for to receive the wheel oversized
Bearing stop: 360°
Balancing: 150,000 rpm on a Cimat VSR test bench
The wheel oversized requires the casing to be re-profiled d'admission'. Increasing its dimensions may affect flow capacity and response time; it must therefore be incorporated into a coherent engine tuning programme.
Stage 2+
Compressor wheel: MFS Performance high-speed oversized
Dimensions: 39.61 / 56.02 mm
Blade configuration: 11+0
Carter d'Admission:' Reprofiled for to receive the wheel oversized
Bearing stop: 360°
Balancing: 150,000 rpm on a Cimat VSR test bench
This test rig accommodates the largest compressor wheel of the three documented configurations. A larger displacement alone does not guarantee better performance in all conditions: the result depends on the engine as a whole, the turbocharger settings and the intended use.
What is a hybrid turbo ?
A hybrid turbo is based on a specially adapted turbocharger design for to receive internal components or machined parts that differ from the specification d'origin'. Depending on the modification, changes may relate to the compressor impeller, its dimensions and geometry, the casings, the turbine impeller, the thrust bearing system or the balancing.
The aim is d'adjust the compression capacity and flow rate' d'air'. A hybrid turbocharger is not defined solely by the appearance of its impeller: its dimensions, its aerodynamic profile and the overall coherence of the unit are crucial.
MFS compressor wheel: standard or Performance ? ?
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This term describes a manufacturing process and does not, in itself, guarantee an increase in throughput d'air'.
A standard MFS wheel can retain a geometry equivalent to that d'origin'. An MFS wheel Performance may use a blade geometry, profile, diameter or configuration suited to the purpose of the preparation.
A standard MFS wheel can be just as shiny as an MFS wheel Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more d'air'. A higher flow rate can help to generate more power when the engine and its control system are set up accordingly, although this does not in itself guarantee a performance gain.
Why does the geometry of the blades affect the flow rate? d'air?' ?
The compressor wheel draws in and then compresses the air fed to the engine. Its diameter, profile, height, width and the arrangement of its blades influence the aerodynamic behaviour of the compressor. The right geometry can move more d'air within certain operating ranges'.
The result also depends on the compressor housing, the impeller and the turbine housing, the boost pressure and the engine tuning. A larger wheel may affect response time and range d'optimal use; it is therefore not automatically the best option' for all uses.
Reliability and balancing of the hybrid turbocharger
The three work placements offer d'a 360° bearing stop, designed for to distribute axial forces over a large area. His presence does not exempt him from d'proper lubrication or compliance with the installation requirements'.
Each configuration is balanced at high speed, up to 150,000 rpm on a Cimat VSR test bench. This balancing is designed to minimise vibrations and mechanical stresses on the rotor, but does not protect against incorrect installation, contamination or a fault d'oil supply'.
Engine remapping and tuning
Making use of characteristics d'A hybrid turbo may require adjustments to the engine mapping and boost pressure control'. Depending on the stage of preparation, injection, air cooling d'The intake, exhaust, clutch or transmission must also be checked or adjusted'.
The wastegate must be adjusted during the fitting and remapping of the ECU. A hybrid turbo does not automatically guarantee a power increase without consistent tuning of the entire system.
Turbo part numbers
OEM part numbers
MW30620721
1441100QAA
4409975
5860004
93160135
93184486
7700105102
7700105102C
7700108052
7701472228
7701478022
7711134299
7711497142
7711497500
8200084399
8200091350
8200091350A
8200091350B
8200143794
8200348244
8200458162
8200544911
8200683854
82107431
30620721
36002418
8602271
Manufacturer’s part numbers
751768-5004S
751768-0003
751768-3
751768-0001
751768-1
703245-0002
703245-2
703245-0001
703245-1
717345-0002
717345-2
53039700048
53039800048
53039880048
53039900048
K03-0048
Compatible vehicles and assignments
Mitsubishi
Carisma 1.9 DID — 80 and 100 hp
Start: Year 2000, month unspecified — end unspecified
Carisma 2 1.9 DID — 102 hp
Start: Year 1999, month unspecified — end unspecified
Space Star 1.9 DID — 102 hp
Start: Year 1998, month unspecified — end unspecified
Nissan
Interstar 1.9 DCI — 82 hp
Start: Year 2002, month unspecified — end unspecified
Interstar 2 1.9 DCI — 82 hp
Start: Year 2003, month unspecified — end unspecified
Primastar 1.9 DCI — 100 hp
Start: Year 2002, month unspecified — end unspecified
Opel
Movano 1.9 DCI — 102 hp
Start: Year 2000, month unspecified — end unspecified
Movano A 1.9 DTI — 80 and 100 hp
Start: Year 1998, month unspecified — end unspecified
Movano A Phase 2 1.9 DTI — 80 and 100 hp
Start: Year 2003, month unspecified — end unspecified
Vivaro 1.9 DI — 80 hp
Start: Year 2001, month unspecified — end unspecified
Vivaro 1.9 DTI — 100 hp
Start: Year 2001, month unspecified — end unspecified
Renault
Clio 2 1.9 DTI — 80 and 100 hp
Start: Year 2001, month unspecified — end unspecified
Kangoo 1.9 DCI — 80 and 100 hp
Start: Year 1997, month unspecified — end unspecified
Kangoo 1.9 DTI — 80 and 100 hp
Start: Year 1997, month unspecified — end unspecified
Kangoo Phase 2 1.9 DCI — 80 and 100 hp
Start: Year 2003, month unspecified — end unspecified
Kangoo Phase 2 1.9 DTI — 80 and 100 hp
Start: Year 2003, month unspecified — end unspecified
Laguna 2 1.9 DCI — 105 and 107 hp
Start: Year 2001, month unspecified — end unspecified
Laguna 2 Phase 2 1.9 DCI — 105 and 107 hp
Start: Year 2005, month unspecified — end unspecified
Laguna Nevada Phase 2 1.9 DCI — 107 hp
Start: Year 1998, month unspecified — end unspecified
Laguna Phase 2 1.9 DCI — 107 hp
Start: Year 1998, month unspecified — end unspecified
Master 2 1.9 DCI — 80 and 82 hp
Start: Year 1997, month unspecified — end unspecified
Master 2 1.9 DCI — 80 and 100 hp
Start: Year 2001, month unspecified — end unspecified
Master 2 Phase 2 1.9 DCI — 82 hp
Start: Year 2003, month unspecified — end unspecified
Megane Phase 2 1.9 DCI — 80 and 100 hp
Start: Year 1998, month unspecified — end unspecified
Megane Phase 2 1.9 DCI — 105 hp
Start: Year 1998, month unspecified — end unspecified
Megane Phase 2 1.9 DTI — 80 and 100 hp
Start: Year 1998, month unspecified — end unspecified
Megane Scenic Phase 2 1.9 DCI — 105 hp
Start: Year 1999, month unspecified — end unspecified
Scenic 1.9 DCI — 100 hp
Start: Year 2000, month unspecified — end unspecified
Trafic 2 1.9 DCI — 82 hp
Start: Year 2001, month unspecified — end unspecified
Trafic 2 1.9 DCI — 100 hp
Start: Year 2001, month unspecified — end unspecified
Volvo
S40 1.9 TDCI — 102 hp
Start: Year 1995, month unspecified — end unspecified
V40 1.9 TDI — 102 hp
Start: Year 1995, month unspecified — end unspecified
Engine codes: not specified for these assignments.
Additional technical specifications
Product type: Hybrid Turbo
Documented engine specifications: 1.9 DCI, DID, DTI, DI, , TDCI and TDI
Power ratings by application: 80, 82, 100, 102, 105 and 107 hp
Installation: Configuration plug & play, with no changes announced for Fitting the turbo
Engine codes: Not specified
Assembly instructions
⚠️ WARNING — IMPORTANT BEFORE ASSEMBLY
Before installation, identify and rectify the cause of the previous fault. Check the lubrication circuit, the supply and the return d'the oil and the cleanliness of all the pipes'.
Check the intake and ensure there are no foreign objects present. Carry out the priming in accordance with the relevant guidelines and follow the vehicle manufacturer’s instructions.
The wastegate and boost management must be set in line with the engine mapping. Systems d'injection, d'The exhaust and cooling systems must be checked depending on the level of preparation'.
If a lubrication fault is not rectified, it may lead to the turbocharger failing again.
How do you choose the right turbo ?
First of all, check the reference number engraved or marked on the turbo d'original', then compare it with the OEM and manufacturer part numbers listed on this sheet. Also check the make, model, generation, engine type and power output in hp and theYear assembly.
The same engine can be fitted with several different turbo set-ups. The engine code should also be checked where it is available on the vehicle or in its documentation.
⚠️ Check your turbo’s part numbers
Before placing your order, Compare the part number on your turbocharger d'origin' using the references given in this fact sheet. Having the same motor does not always guarantee compatibility.
If you are in any doubt, please contact us with the full part number of your turbocharger d'Vehicle origin and details'.